MINI/+

Microswiss CM2 Nozzle The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its...

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

Digital Calipers Kinex 150mm (Kinex is now K-MET) Features:Measuring length: 150mm/ 6in0,01mm resolutionmm/in toggle buttonKeeps measured value after turning offDIN 862, ČSN EN ISO 13385-1 Includes: Digital calipers (1 pcs)Plastic case (1...

E3D Revo™ for Prusa MINI Edition Revo™ Prusa MINI edition is a drop-in replacement, giving you all the benefits of E3D’s Rapid Change Revo ecosystem in an easy-to-upgrade package. The E3D Revo kits come in two separate parts. A...

Revo Cables for Prusa MINI/+ Includes: Heater cable (1 pcs)Thermistor cable (1 pcs) Fits (fits below printers with the Revo Micro hotend upgrade):Prusa MINIPrusa MINI+

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes:Extruder Drive Gear (Motor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven...

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Prusa X Axis GT Timing Belt Includes: Belt (1 pcs) Location: X axis Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Y Axis Timing Belt Includes: Belt - Y Axis (1 pcs) Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY compatible with the Original Prusa MINI and MINI+. To...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The thermal paste should not be applied to the hot side...

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage: 40WLength: 820 mm Fits:MINIMINI+ Note: The Molex...

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Note  Disassembled from new Prusa Hotend Assemblies and may contain residual traces of thermal...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE connection (1 pcs)Screws: M3x4 (3 pcs)Thermal paste (0...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

HEPA Filter for Prusa Enclosures Includes: HEPA filter (1 pcs) Fits:Prusa MINI EnclosurePrusa i3 MK Series Enclosure Prusa XL EnclosurePrusa HT90Core One To replace this part, please visit the Prusa knowledge base at help.prusa3d.com