Adventurer 3 & 3 Pro

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

  Flashforge Extruder Air Duct  Directs air to the part being printed Includes: Air duct (1 pcs) Fits: Adventurer 3Adventurer 3 Pro (not Pro 2)Monoprice VoxelRobo E3 Note: Does not include mounting screws

  Flashforge Air Filter Magnets to the underside of the chamber fan in the top of the print chamber. Includes:HEPA filterCharcoal filterFilter Housing with magnets Fits:Adventurer 3Monoprice VoxelRobo E3

  Bearing Under Build Tray This bearing is located on the underside of the build plate tray. Specifications:ID: 4mmOD: 12mmW: 4mm Includes: Bearing (1 pcs) Fits: Adventurer 3 (all versions)Monoprice VoxelRobo E3

  This is the plastic bracket that the metal Push Fit connecter screws into. Includes: Bracket (1 pcs) Fits:Adventurer 3Adventurer 3 Pro (not Pro  2)Monoprice VoxelRobo E3

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Flashforge Build Plate Slightly flexible for easy removal of printed parts. Comes with print surface (build tape) and latch pre-installed. Includes:Print Surface (1 pcs)Build plate (1 pcs)Build plate latch (1 pcs) Fits:Adventurer 3Monoprice...

  Flashforge Build Plate Frame This is the frame that holds the heater and flexible build plate in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 3 (with flexible bed) Notes:This frame will not work with the glass bed.If you are...

  Flashforge Build Plate Frame This is the frame that holds the glass bed in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 3 (with glass bed) Notes:This frame will not work with the removable flexible bed. You will need this...

Flashforge Build Plate Heater for Removable (Flexible) Print Surface This aluminum heater goes under build plate. Includes: Build plate heater (1 pcs)  Size: 164*168mm Note: Only fits printers with removable print bed...

Build Plate Heater for Glass Print Surface This aluminum heater goes under glass build plate. Includes: Heater plate (1 pcs)  Note: Only fits printers with glass print bed. Does not fit printers with removable...

  Flashforge Build Plate Latch/Handle Includes: Plastic latch (1 pcs) Fits:Adventurer 3Monoprice VoxelRobo E3 Note: Screws not included

  Flashforge Build Plate Bearing Guide Tape - 2 pack This is the clear tape that goes under the built plate tray which the bearing rides on.  Includes: Tape (2 pcs) FitsAdventurer 3 (all versions)Robo E3MP Voxel

  Flashforge Cable - X Axis Stepper Motor Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3  

  Flashforge Extruder Motor Cable Runs from extruder motor to mainboard.  Length: 62cm Includes: Cable (1 pcs) Fits: Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Flashforge Filament Sensor Cable Runs from filament sensor to mainboard Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Flashforge LED Light Cable Includes: Cable (1 pcs) Length:7cm Fits:Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3

  Nozzle Heating Cable Connects nozzle to transfer board. Length: 6cm Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

Flashforge X Motor Cable Runs from the X axis motor to the mainboard. Includes: Cable (1 pcs) Fits:Creator MaxDreamerDreamer NXInventorAdventurer 3Adventurer 3 ProRobo E3Monoprice Voxel

 Used Item  Cables are removed from low hour 3D printers. Flashforge X Motor Cable Runs from the X axis motor to the mainboard. Includes: Cable (1 pcs) Fits:Creator MaxDreamerDreamer NXInventorAdventurer 3Adventurer 3 ProRobo...

  Flashforge Y Stepper Motor Cable Runs from Y axis motor to mainboard. Includes: Cable (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3

  Flashforge Cable for Y Limit Switch - Y Max Runs from Y axis limit switch to the mainboard. Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3

  Flashforge Z Axis Stepper Motor Cable Runs from Z stepper motor to mainboard Fits: Adventurer 3 (all versions)Adventurer 4Monoprice VoxelRobo E3

  Flashforge Cable for Z Limit Switch - Z Max Runs from Z axis sensor to mainboard Includes: Cable (1 pcs) Fits: Adventurer 3 (all versions)Monoprice VoxelRobo E3

Flashforge Chamber Camera Includes: Camera (1 pcs) Fits:Adventurer 3Monoprice Voxel Note: Mounting screws not included. Compatible screws available here.

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Adventurer 3Monoprice VoxelRobo E3

Flashforge Ceramic Eye - Filament Guide Includes: Eyelet (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)DreamerGuider 2Guider 2SGuider 2S HTInventorMonoprice VoxelRobo E3

  Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder...

  Flashforge Filament Feeder (Extruder) Assembly Comes fully assembled and ready to install. Includes:Filament runout sensor (1 pcs)Cable for runout sensor (1 pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly  Fits:...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max...

  Flashforge Extruder PCB Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into and is also the X axis limit switch. Fits: Adventurer 3Adventurer 3 Pro (not pro 2)Monoprice VoxelRobo E3

Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...

 Used Item  Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...

  Flashforge 3010 Fan Includes: Fan (1 pcs)Voltage: 24 VDCSize: 30x30x10mm Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4 ProGuider 2Guider 2S HTCreator 3 ProRobo E3Monoprice Voxel

  Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steel filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...

  Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator...

  Flashforge Filament Runout Sensor This is the V2 filament sensor. Check the photo and make sure it matches your current sensor. Includes: Filament sensor V2 (1 pcs) Fits:Adventurer 3Adventurer 4Robo E3Monoprice Voxel

  Flashforge Filament Tension Lever Includes: Plastic lever (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Dreamer (Right Side)Dreamer NXCreator Pro (Right Side)Creator Pro 2 (Right Side)Creator Max (Right...

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

  Flashforge FPC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FPC Cable (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3 WARNING: Pay close attention to the...

  Flashforge Print Head Flat Cable This is the FPC flat cable that runs from the print head to the mainboard. Includes: FPC Cable (1 pcs) Fits:Adventurer 3Adventurer 3 Pro (not Pro 2)Monoprice VoxelRobo E3  WARNING Pay...

  Flashforge TFT Touch Screen Cable Runs from touch screen to mainboard Includes: FPC Cable (1 pcs) Fits:Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3D  WARNING Pay attention to the orientation of your current cable...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

  Flashforge Front Door Includes: Front door (1 pcs)Magnets (2 pcs) Fits: Adventurer 3 (all models)Monoprice VoxelRobo E3

  Flashforge 8a Fuse Includes: Fuse (2 pcs) Location: Power inlet plug (on/off switch) Fits: Adventurer 3 (all versions)Monoprice VoxelRobo E3

  Flashforge Glass Build Plate Includes: Glass build plate (1 pcs) Fits: Adventurer 3 Note: This is not an upgrade kit, this bed will only work if your printer already uses a glass build plate.  WARNING  Always allow the...

  Flashforge Glass Build Plate Assembly You can use this assembly to convert your Adventurer 3 to a glass build plate. Includes: Glass build plate (1 pcs)Build plate frame (1 pcs)Heater (1 pcs)Heater pads (4 pcs)Mounting screws (3 pcs)Bearing...

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits:Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3

  Flashforge Hotend (Print Head) Housing Includes:Top housing (1 pcs)Bottom housing (1 pcs)M3 screw (1 pcs) Fits: Adventurer 3Adventurer 3 ProMonoprice VoxelRobo E3 Note: Does not include: Nozzle, fan shroud or any...

Leadscrew Bushing This small plastic bushing is located at the bottom of the Z axis leadscrew. Includes: Bushing (1 pcs) Fits:Adventurer 3Adventurer 3 ProRobo E3Monoprice Voxel

  Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versionsFinder 2Monoprice VoxelRobo E3

  Flashforge Build Plate Limit Switch (Y Axis Sensor) For the Y Axis Includes: Limit switch (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3 Scroll down for Adventurer 4 instruction video 

  Flashforge Z Limit Switch This is the limit switch (endstop) for the Z axis. It is sometimes called the Z axis sensor switch. Includes: Limit switch (1 pcs) Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3

M2x6mm Blunt Nose Screw Set Includes: Screws (5 pcs) Head: PanSize: M2Length: 6mmType: Blunt nose

  Flexible Magnetic Build Plate Kit - Powder Coated Textured PEI Flexible steel build plate with powder coated textured PEI print surface on one side.  Includes: Build plate (1 pcs)Magnet - Adhesive backed (1...

  Please read our returns policy regarding electronic items Flashforge Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 3 Pro

  Please read our returns policy regarding electronic items Adventurer 3 Mainboard Includes: Mainboard (1 pcs)  Fits: Adventurer 3  IMPORTANT  Not for the Adventurer 3 Pro/Pro 2 Scroll down for instruction video

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...

  Flashforge Nozzle Assembly (latest version) Includes: Nozzle Assembly (1 pcs) Size: Select Above Max Temperature: 240°c (if you need a higher max temp, please click here for the high temp nozzle) Fits: Adventurer...

Flashforge 265­° Hardened Steel Nozzle Assembly  Hardened steel, high temperature nozzle for printing with abrasive materials Size: 0.60mm  Includes: Nozzle assembly (1 pcs)  Max Temperature: 265°c...

  Flashforge High Temp Nozzle Assembly Size: Select Above Max temperature: 265°c  Includes: Nozzle assembly (1 pcs) Fits: Adventurer 3 Adventurer 3 V2Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4...

Flashforge 240­° High Speed Nozzle Assembly  Size: 040mm  Includes: Nozzle assembly (1 pcs)  Max Temperature: 240°c Fits: Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4 (* Firmware update...

  Nozzle Clips and Spring (for Print Head) Includes: Clip (2 pcs)Spring (1 pcs) Fits:Adventurer 3Adventurer 3 ProRobo E3MP Voxel

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

  Flashforge Nozzle Heating PCB Board Also called the nozzle adapter board Includes: PCB Board (1 pcs) Fits: Adventurer 3Adventurer 3 Pro (not Pro 2)Monoprice VoxelRobo E3

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

  Flashforge Power Supply Includes: Power supply (1 pcs) Fits:Adventurer 3Adventurer 3 Pro (not Pro 2)Monoprice VoxelRobo E3

  Flashforge Bed Tape (Print Surface)  Adhesive backed for easy application Includes: Print surface (3 pcs) Fits: Adventurer 3Monoprice VoxelRobo E3

  Flashforge PTFE Tube Runs from the filament feeder (extruder) to the print head. Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Monoprice VoxelRobo E3 Note: Does not include snap ring Watch the videos below for helpful information on...

  Brass Push Fit Connector (latest version) This is the latest version of the push fit connector from Flashforge. It replaces the older silver push fit connector (see picture below).  Includes: Push fit connector (1...

  Snap Ring for Teflon Tube  Includes: Snap ring (2 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Robo E3Monoprice Voxel

  Flashforge Stepper Motor (X/Y/Z) Includes: Stepper motor (1 pcs) Location: X/Y/Z Axis* Fits: Finder *(X/Y Axis Only)Finder 2 *(X/Y Axis Only)Adventurer 3 (X/Y/Z)Adventurer 3 Pro (X/Y/Z)Adventurer 3 Pro 2 (X/Y/Z)Adventurer...

  Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3D Scroll down for instruction video

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  Flashforge WiFi Antenna Includes: Antenna (1 pcs) Fits:Adventurer 3Adventurer 3 Pro Monoprice VoxelRobo E3

Bushing Set for X Axis These are the small brass bushings the X axis carriage slides on.  Includes: 6mm bushing (1 pcs)8mm bushing (2 pcs) Fits:Adventurer 3 (all models)Adventurer 4 (all models)Robo E3Monoprice Voxel

  Flashforge X Axis Linear Rod These are the rods the print head slides back and forth on.  Includes: Linear rod (2 pcs) Location: X axis Fits:Adventurer 3 LiteAdventurer 3Adventurer 3 Pro

  Flashforge Timing Belt Belt for X Axis Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

  Flashforge Y Carriage Bracket (plastic bracket only - hardware not included) This is the plastic bracket the bed attaches to. It slides back and forth on the Y rod. This part is sometimes called the Y Axis shuttle Includes: Top bracket (1...

  Flashforge Timing Belt Belt for Y Axis Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

  Flashforge Timing Belt Belt for Z Axis. Length: 672mm Includes: Belt (1 pcs) Fits:Adventurer 3 (all versions)Monoprice VoxelRobo E3 Note: Item may differ from picture

  Flashforge Z Belt Tensioner - Idler Pulley Tensioner bracket for Z-axis belt. Includes: Frame (1 pcs) Idler (1 pcs)Axial (1 pcs)Screws (2 pcs) Fits: Adventurer 3 (all versions)Monoprice VoxelRobo E3