Adventurer 4 & 4 Pro

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

  Flashforge Hotend Air Duct Directs air to the part being printed. Includes: Air duct (1pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro Note: Does not include mounting hardware.

  Air Duct and Print Head Bottom Cover  Directs air to the part being printed and holds the LED light and nozzle latches in place.  Includes: Air duct (1 pcs) Fits: Adventurer 4 Note: Does not include mounting screw

  Flashforge Air Filter HEPA and charcoal air filter. Includes: Filter (1 pc) Fits:Adventurer 4Robo E4 ProGuider 3Guider 3 PlusCreator 3Creator 3 Pro

6mm GT Belt Includes: Belt (1 pcs) Location: X axis Length: 720mm Fits: Adventurer 4

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Flashforge Magnetic Build Plate Base For use with Flashforge flexible build plate (not included) Includes: Magnetic build plate base (1 pcs) Fits: Adventurer 4 Note: If you are upgrading from a glass build plate you will also need the plastic...

  Flashforge Build Plate Frame for Glass Bed This is the frame that holds the glass bed in place. Includes: Plastic frame (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass bed) Notes:This frame will not work with the magnetic bed. You will...

  Flashforge Build Plate Frame This is the frame that holds the magnetic base in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 4 Notes: This frame will not work with the glass bedMounting hardware not included Little...

Build Plate Heater for Flashforge Adventurer 4 Pro Includes: Heater (1 pcs) Fits: Adventure 4 Pro

Build Plate Heater for Flashforge Adventurer 4 Includes: Heater (1 pcs) Fits: Adventure 4

  Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Extruder Motor Cable Runs from extruder motor to mainboard.  Length: 62cm Includes: Cable (1 pcs) Fits: Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Flashforge Filament Sensor Cable Runs from filament sensor to mainboard Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Nozzle Heating Cable Connects nozzle to transfer board. Length: 6cm Includes: Cable (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Flat Cable for TFT Touch Screen Connects touch screen to mainboard Includes: Cable (1 pcs) Fits: Adventurer 4  WARNING  Pay attention to the orientation of your current cable.Plugging this cable in backwards will...

  Flashforge Cable for USB Port Runs from USB port to the mainboard. Includes: Cable (1 pcs) Fits: Adventurer 4

  Flashforge X Motor Cable This cable runs from the mainboard to the X axis stepper motor that moves the left extruder Includes: Cable (1 pcs) Fits: Adventurer 4

  Flashforge Y Limit Switch (Build Plate Endstop) Cable Includes: Cable (1 pcs) Fits: Adventurer 4

  Flashforge Z Axis Stepper Motor Cable Runs from Z stepper motor to mainboard Fits: Adventurer 4

  Flashforge Y Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits: Adventurer 4

Flashforge Build Chamber Camera Includes: Camera (1 pcs) Fits: Adventurer 4 Note: Mounting screws not included. Compatible screws available here.

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Adventurer 4

Flashforge Ceramic Eye - Filament Guide Includes: Eyelet (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)DreamerGuider 2Guider 2SGuider 2S HTInventorMonoprice VoxelRobo E3

  Door for Build Plate Ribbon Cable Access This is the small plastic door that goes on the bottom of the build plate where the ribbon cable is located.   Includes: Door (1pcs) Fits: Adventurer 4

  Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4 Pro

  Filament Feeder (Extruder) Assembly Fully assembled Includes:Filament runout sensor (1pcs)Stepper motor (1 pcs)PTFE tube (1 pcs)Filament feeder assembly (1 pcs)  Fits: Adventurer 4

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Extruder Lever Assembly - Right Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1 pcs)6mm...

  Flashforge Extruder Board (Extruder Transfer Board) This is the top PCB board that the flat cable plugs into. It is also the X axis sensor. Includes: Transfer board/limit switch (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max...

Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...

 Used Item  Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...

  Flashforge 3010 Fan Includes: Fan (1 pcs)Voltage: 24 VDCSize: 30x30x10mm Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4 ProGuider 2Guider 2S HTCreator 3 ProRobo E3Monoprice Voxel

  Flashforge Blower (Print) Fan Cools the part being printed Voltage: 24 Size: 35x35x10mm Fits: Adventurer 4Finder 3Artemis

  Fan Set (Two to One) Includes: 3010 Fan (1 pcs)3510 Fan (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steel filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...

  Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator...

Filament Runout Sensor Includes: Filament Sensor (1 pcs) Fits:Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Filament Runout Sensor This is the V2 filament sensor. Check the photo and make sure it matches your current sensor. Includes: Filament sensor V2 (1 pcs) Fits:Adventurer 3Adventurer 4Robo E3Monoprice Voxel

  Flashforge Filament Tension Lever Includes: Plastic lever (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Dreamer (Right Side)Dreamer NXCreator Pro (Right Side)Creator Pro 2 (Right Side)Creator Max (Right...

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

  Flashforge FPC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FPC Cable (1 pcs) Fits: Adventurer 4 Pro  WARNING  Pay close attention to the orientation of your current...

  Flashforge FPC Flat Cable for Build Plate Heater Runs from heated build plate to mainboard. Includes: FPC Cable (1 pcs) Fits:Adventurer 4  WARNING  Pay close attention to the orientation of your current cable...

  Flashforge Print Head Flat Cable This is the FPC flat cable that runs from the print head to the mainboard. Includes: FPC Cable (1 pcs) Fits: Adventurer 4 Pro  WARNING Pay attention to the orientation of your current...

  Flashforge Print Head Flat Cable This is the FPC flat cable that runs from the print head to the mainboard. Includes: FPC Cable (1 pcs) Fits: Adventurer 4  WARNING Pay attention to the orientation of your current...

  Smooth PEI Flexible Build Plate  Flexible steel build plate with smooth PEI print surface on one side. Includes: Build plate (1 pcs)PEI print surface - installed (1 pcs) Fits: Adventurer 4 Pro

  Flexible Build Plate with Print Surface Includes: Flexible build plate (1 pcs)Print Surface (build tape) pre-installed (1 pcs) Fits: Adventurer 4

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Front Door for Flashforge Adventurer 4 Acrylic Includes: Door with magnets (1 pcs) Fits: Adventurer 4

  Flashforge Glass Build Plate One side is smooth, one side is textured. Includes: Glass build plate (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass build plate) Notes:This is not an upgrade kit. If your printer currently has a magnetic...

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 3 Pro 2Adventurer 4 Pro

  Flashforge Hotend Assembly (Print Head) Fully assembled.  Includes:0.40mm Nozzle assembly (1pcs)Fan (1 pcs)LED light (1 pcs)Internal PCB boards and wires Fits: Adventurer 4Adventurer 4 Lite

  Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versionsFinder 2Monoprice VoxelRobo E3

  Flashforge Build Plate Limit Switch (Y Axis Sensor) For the Y Axis Includes: Limit switch (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3 Scroll down for Adventurer 4 instruction video 

  Flashforge Z Axis Limit Switch Includes: Limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

M2x6mm Blunt Nose Screw Set Includes: Screws (5 pcs) Head: PanSize: M2Length: 6mmType: Blunt nose

Please read our returns policy regarding electronic items Flashforge Mainboard Includes: Mainboard (1 pcs) Fits: Adventurer 4 Pro

  Please read our returns policy regarding electronic items Flashforge Adventurer 4 Mainboard Includes: Mainboard (1 pcs)  Fits: Adventurer 4  IMPORTANT  Not for the Adventurer 4 Pro

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...

  Flashforge Nozzle Assembly (latest version) Includes: Nozzle Assembly (1 pcs) Size: Select Above Max Temperature: 240°c (if you need a higher max temp, please click here for the high temp nozzle) Fits: Adventurer...

Flashforge 265­° Hardened Steel Nozzle Assembly  Hardened steel, high temperature nozzle for printing with abrasive materials Size: 0.60mm  Includes: Nozzle assembly (1 pcs)  Max Temperature: 265°c...

  Flashforge High Temp Nozzle Assembly Size: Select Above Max temperature: 265°c  Includes: Nozzle assembly (1 pcs) Fits: Adventurer 3 Adventurer 3 V2Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4...

Flashforge 240­° High Speed Nozzle Assembly  Size: 040mm  Includes: Nozzle assembly (1 pcs)  Max Temperature: 240°c Fits: Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4 (* Firmware update...

  Nozzle Clips and Spring (for Print Head) These clips hold the nozzle assembly in place Includes: Left clip (1 pcs)Right Clip (1 pcs)Spring (1 pcs) Fits: Adventure 4

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

  Flashforge X Carriage (Print Head Mounting Bracket) This is the bracket the print head mounts on and slides back and forth on the X carriage.  Includes: Bracket (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4Adventurer 4 Pro

Flashforge Print Surface Adhesive backed for easy application Includes: Print Surface (1 pcs) Fits: Adventurer 4

  Flashforge PTFE Tube Runs from the extruder (filament feeder) to hotend (print head) Includes: PTFE tube (1 pcs)  Fits: Adventurer 4

  Brass Push Fit Connector (latest version) This is the latest version of the push fit connector from Flashforge. It replaces the older silver push fit connector (see picture below).  Includes: Push fit connector (1...

  Push Fit Connector Bracket This is the plastic bracket that the metal Push Fit connecter screws into. Includes: Bracket (1 pcs) Fits: Adventurer 3 Pro 2Adventurer 4Adventurer 4 Pro

Side Door for Flashforge Adventurer 4 Door for the filament chamber Includes: Door with magnets (1 pcs) Fits: Adventurer 4

  Snap Ring for Teflon Tube  Includes: Snap ring (2 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Robo E3Monoprice Voxel

  Flashforge Stepper Motor (Y) Includes: Stepper motor (1 pcs) Location: Y Axis Fits: Adventurer 4

  Flashforge Stepper Motor (X/Y/Z) Includes: Stepper motor (1 pcs) Location: X/Y/Z Axis* Fits: Finder *(X/Y Axis Only)Finder 2 *(X/Y Axis Only)Adventurer 3 (X/Y/Z)Adventurer 3 Pro (X/Y/Z)Adventurer 3 Pro 2 (X/Y/Z)Adventurer...

  Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Monoprice VoxelRobo E3

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge TFT Touch Screen Includes: Touch Screen (1 pcs) Fits: Adventurer 4 Scroll down for instruction video

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge USB Interface PCB Board (USB Port) Includes: USB board (1 pcs)   Fits: Adventurer 4Guider 3 Plus

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  Flashforge WiFi Antenna Includes: Antenna (1 pcs) Fits:Adventurer 3Adventurer 4Monoprice VoxelRobo E3

Bushing Set for X Axis These are the small brass bushings the X axis carriage slides on.  Includes: 6mm bushing (1 pcs)8mm bushing (2 pcs) Fits:Adventurer 3 (all models)Adventurer 4 (all models)Robo E3Monoprice Voxel

  Flashforge Leadscrew Set Includes: Left leadscrew (1 pcs)Right leadscrew (1 pcs) Fits: Adventurer 4 Note: Does not include leadscrew nut