Bambu Lab

Bambu Lab

The parts in this section will fit Bambu Lab printers

  • Boron Nitride Thermal Paste 3cc

    Boron Nitride Thermal Paste

    PB Select™

    Regular Price: $11.65 - $116.50
    Price: $4.99 - $49.95
    Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...
    Regular Price: $11.65 - $116.50
    Price: $4.99 - $49.95
  • 3D Print Cleanup Tool

    Edge Cleanup (Deburring) Tool for 3D Prints

    NOGA

    Price: $13.95
    3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...
    Price: $13.95
  • FlowTech™ Hotend for Bambu Lab X1 and P1 Series

    FlowTech™ Hotend for Bambu Lab X1 and P1 Series | Microswiss

    Microswiss

    Price: $64.99
    Microswiss FlowTech™ Hotend for Bambu Lab X1 and P1 Series This kit comes with a 0.40mm CHT nozzle, plug-and-play heater core/thermistor and is fully compatible with the Bambu Lab printers listed below. Stock z-height, build volume and...
    Price: $64.99
  • Flush Cut Wire Cutter - 5in |

    Flush Cut Trimmer (Side Cutters)

    PB Select™

    Price: $4.99
    Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)
    Price: $4.99
  • Nozzle Coat™ for 3D Printing

    Nozzle Coat | 4ml

    PB Select™

    Price: $14.99
    PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...
    Price: $14.99
  • White PTFE tube

    PTFE Tube (Cut to Length) White - OD 4mm, ID 2.5mm

    PB Select™

    Price: $4.99
    PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: White Max Working Temp:...
    Price: $4.99
  • Sock-X Silicone Sock for Bambu Labs Hotend | Black

    Sock-X Silicone Sock for Bambu Labs Hotend | Black

    Levendigs

    Price: $5.99
    Sock-X for Bambu Labs Hotend This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Bambu Labs Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature,...
    Price: $5.99
  • Synthetic Grease with SYNCOLON™ (PTFE)

    Synthetic Grease with SYNCOLON™ (PTFE) | 12g

    Super Lube

    Price: $5.99
      Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...
    Price: $5.99
  • Synthetic Grease with SYNCOLON™ (PTFE) | 3oz

    Synthetic Grease with SYNCOLON™ (PTFE) | 3oz

    Super Lube

    Price: $9.99
      Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...
    Price: $9.99