Cable - Stepper Motor PH6 to XH2.54 - 4 pin | 1 meter

• Approximately 1 meter long
• Nema 17 stepper motor 6-pin connector to XH2.54 4-pin connector

The default wiring for this extension cable is listed below. You may need to switch the pins around to match your setup. This is done by carefully lifting the plastic tap that holds the pin in place and gently sliding the pin out. 

Controller Side     Motor Side
PIN 1  —————–PIN 1
PIN 2 —————– PIN 3
PIN 3 —————– PIN 4
PIN 4 —————– PIN 6