Centauri Carbon

Elegoo Centauri Series Accessory Kit  Includes: Pre-assembled hotend with 0.40mm nozzle, heater and thermistor (1 pcs) Dual-sided build plate variety pack (3 plates)60mL PEI liquid glue pack (2 bottles) Anti-vibration feet (4...

Elegoo Anti-Vibration Feet for Centauri & Centauri Carbon - 4 Pack Easy Installation: no need to remove your printer's existing feet, simply install the anti-vibration feet directly on top. Includes: Rubber foot (4...

Elegoo Centauri Bed Leveling Pressure Sensor This is the build plate leveling pressure sensor with the longer wire. Includes: Pressure sensor (1 pcs) Wire length: 225mm (approximately) Fits: Elegoo CentauriElegoo Centauri Carbon

Cable for Bed Leveling Sensor Includes: Cable (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Bed Leveling Sensor with Short Wire There are two different bed leveling sensors. Short wire and long wire, this one has the short wire. Double check the length of the wire you need before ordering.  Includes: Sensor Plate...

Elegoo Centauri Carbon Bed Thermistor This thermistor reads the temperature of the heated print bed.  Includes: Bed thermistor (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Z Axis Limit Switch Cable (Wire) Includes: Cable (1 pcs) Length: 965mm Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Chamber Thermistor This thermistor reads the temperature of the print chamber.  Includes: Thermistor (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Cooling Fan Assembly  This fan cools the coldside (heatsink) of the hotend. Includes: Fan (1 pcs)Fan shroud (1 pcs)Mounting screw (1 pcs) Size: 30x30x10mm Fits: Elegoo Centauri Carbon

Dual-Sided Textured PEI Build Plate for Centauri Carbon  These plates have a slightly textured surface. To remove a finished print, allow the print to cool and then bend the plate slightly to pop the print off. To clean, use isopropyl...

Centauri Carbon Dual-Sided Build Plate - 3 Pack  Made from magnetic spring steel, these plates snap easily onto your heated bed for instant printing - no installation needed. Strong magnets keep the plates securely in place.Easy removal of prints...

Elegoo Centauri Carbon Filament Sensor Assembly Includes: Filament sensor (1 pcs)Mounting hardware (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Filament Sensor Cable  Includes: Cable (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon

FlowTech™ Hotend for Elegoo Centauri Carbon Microswiss FlowTech Hotend is engineered for speed and reliability. Paired with Bondtech CHT High Flow Nozzle, this setup delivers up to 50 mm³/sec for fast printing without...

Glass Front Door for Elegoo Centauri Carbon Includes: Glass door (1 pcs)Upper hinge assembly (1 pcs)Lower hinge assembly (1 pcs) Fits: Elegoo Centauri Carbon

Glass Top Cover for Elegoo Centauri Carbon  Includes: Glass Cover (1 pcs) Fits: Elegoo Centauri Carbon

Brass Nozzle with Hardened Tip for Elegoo Centauri Carbon Includes: Nozzle (1 pcs) Size: 0.40mm Fits: Elegoo CentauriElegoo Centauri Carbon

Elegoo Centauri Carbon Hotend Assembly Ships fully assembled. Includes:  Heatsink (1 pcs)Nozzle assembly - of selected size (1 pcs)Nozzle heater (1 pcs)Nozzle thermistor (1 pcs)Silicone sock (1 pcs)Mounting screws (2...

Elegoo Centauri Carbon Cooling Fan This fan cools the heatsink (coldside) of the hotend assembly. Includes: Fan (1 pcs) Size: 30x30x10mm Fits: Elegoo Centauri Carbon

Elegoo Centauri Carbon Hotend Heating Interface PCB Board Includes: Interface board (1 pcs) Fits: Elegoo CentauriElegoo Centauri Carbon