ClearScent ABS - Transparent Clear - 1.75mm 750g | Formfutura Clearance*

*Clearance item - no returns

ClearScent ABS 1.75mm Filament - Clear, 750g

• Less smelly than regular ABS (there is still an odor but, according to our unscientific testing, it is less extreme than regular ABS)
• Transparent ABS filament with 90% light transmittance with 2.2% haze
• Easy-to-print:
• Warp-free printing and no deformation after cooling
• Improved flowing behavior and inter-layer adhesion
• Good first layer adhesion to several heated print surfaces
• Good chemical resistance

Formfutura ClearScent ABS Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm

Print Temp: ± 220 - 260° C 

Bed Temp: ± 90 - 100° C

Print Speed: Medium   

Fan Speed: 0-25%    

Flow Rate: ± 100%    

Retraction: Yes ± 5mm

Print Surface: GeckoTek, BuildTak, Kapton Tape, PEI, glass, with a coat of DimaFix Pen, if needed.