Copperhead Heat Break Kit for Prusa MINI/+ | Slice Engineering

Slice Engineering Copperhead Heat Break for Prusa MINI/MINI+

The Copperhead Prusa MINI heat break is bimetallic, made of a copper outer body and an interior steel needle, which gives this heat break better cooling performance, allowing for a shorter transition from the hot to the cold side.

Includes:
Copperhead heat break (1 pcs)
PTFE tube (1 pcs)
Silver based thermal paste (1 pcs) 

Fits:
Prusa MINI
Prusa MINI+

 WARNING 
To address the heat creep issues the design features a narrow steel throat with thin walls, so when removing the heater block or changing nozzles, caution is required to avoid damaging the heat break. Before removing the heater block from the heat break (or vice versa), heat up the nozzle, hold the heater block and release some tightening pressure from the nozzle. Let everything cool down. After, you can simply unscrew the heat break from the heater block.

To remove or replace a nozzle, always hold the heater block while tightening or loosening the nozzle.

Please check the Setup Guide on Bondtech's website for detailed instructions (scroll to the bottom of the page).