Creality

Revo™ ObXidian High Flow Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases your...

E3D Creality Unicorn Nozzle - High Flow Brass (Choose Size Above) These premium, high-flow Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max, Ender 3 V3/Plus and Ender 3 V3...

E3D Creality Unicorn Nozzle - High Flow Obxidian (choose size above) These premium, high-flow Unicorn nozzles are an official collaboration between E3D and Creality, designed specifically for use with their K1C, K1 Max, Ender 3 V3/Plus and...

Revo™ Revo Upgrade Kit for Creality Ender 3 S1 - Single Nozzle Voltage: 24 volt  Nozzle Size:  0.40   This kit is a drop-in upgrade for your Creality Ender 3 S1/S1 Pro/S1 Plus. No soldering or crimping necessary...

Revo™ HeaterCore for Creality Sprite - 24 volt This is a special Revo HeaterCore intended for use with the Revo Sprite. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Creality Sprite  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:M2x6 Self tapping...

Revo Coldside Only - For Creality  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:Heatsink (1pcs)Heater...

Revo™ CR HeaterCore for Creality - 24 volt This is a special Revo HeaterCore intended for use with the Revo CR. It uses a 40W heater and a 100K NTC thermistor, which has the same response as a stock Creality thermistor, saving you the...

Revo™ CR - with Fully Loaded Nozzle Kit Voltage: 12 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm  (one of each size) Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available,...

Revo™ CR - with Fully Loaded Nozzle Kit Voltage: 24 volt  Nozzle Sizes: 0.25, 0.40, 0.60 and 0.80mm (one of each size)  Revo CR is a drop-in upgrade for some of the most popular Creality 3D printers available, including the...

Revo Adapter for Creality Sprite Extruder | E3D A replacement Revo adapter for Creality Sprite/Sprite Pro Extruders.  Includes: Adapter (1pcs) Fits: Ender 3 S1Ender S1 ProEnder 3 S1 PlusCR-10 Smart Pro 

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...

Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...

Revo™ Silicone Sock Pack Includes:Yellow (2 pcs)Red (2 pcs)Blue (2 pcs)Green (2pcs)HeaterCore socks (2pcs) Fits: E3D Revo Nozzles and HeaterCore

Revo™ Spring Triple Pack Includes: Revo spring (3 pcs) These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo...