Description
E3D ObXiDian 500 High Flow Hotend for Bambu Lab P1P & P1S
Powered by E3D's brand new ObXiDian 500 technology, these premium hotends are an official collaboration between E3D and Bambu Lab. The unique coating on the nozzles makes them at least 5 times more wear resistant than the original ObXidian range.
Includes: Hotend of selected size (1 pcs)
Fits:
Bambu Lab P1P
Bambu Lab P1S
Learn more about replacing the complete hotend on Bambu Lab Wiki.
Key Features:
- Boost your flowrate by over 60% with E3D’s unique 4-channel insert.
- Built to last – at least five times more wear resistant than the standard ObXidian.
- Print almost any filament*, even glow in the dark filaments, with this super abrasive-resistant nozzle.
- Non-stick nozzle that prevents plastic build-up for pristine prints and reduced print crashes.
- Effortless upgrade - no hardware modifications needed.
- Officially approved & licensed Bambu Lab product.
- Learn more at E3D-Online.com
Important
*1) ObXiDian 500 nozzles are exceptionally wear resistant. However, improvements in ‘exotic’ engineering filaments mean that some new materials which include aggressive fillers, including but not limited to Polymaker’s Fiberon range, can cause significant wear on even ObXiDian 500 nozzles. E3D is actively developing even more specialist solutions for these materials. In the meantime, E3D states: "please be aware that even the rainbows and unicorns in your ObXidian nozzle are not everlasting under extreme material conditions." :)
*1) ObXiDian 500 nozzles are exceptionally wear resistant. However, improvements in ‘exotic’ engineering filaments mean that some new materials which include aggressive fillers, including but not limited to Polymaker’s Fiberon range, can cause significant wear on even ObXiDian 500 nozzles. E3D is actively developing even more specialist solutions for these materials. In the meantime, E3D states: "please be aware that even the rainbows and unicorns in your ObXidian nozzle are not everlasting under extreme material conditions." :)
2) Some filled materials contain particles that are close to, if not larger than, some of the smaller nozzle sizes, including up to 0.4mm. Attempting to print such materials through these nozzle sizes significantly increases the risk a jam. Please check your filament manufacturer’s datasheet for recommended minimum nozzle orifice diameter to ensure that the nozzle/hotend you choose is suitable for your use case.
Additional information about the E3D ObXidian™ High Flow Bambu Lab Hotend can be found here on the E3D support page.
Additional Information
Nozzle Size: |
0.40mm |
Nozzle Size: |
0.60mm |
Brand Name: |
E3D |
Nozzle Type: |
Hardened Steel |
Nozzle Type: |
High Flow |
Nozzle Type: |
ObXidian |
Nozzle Size: |
All Sizes |
E3D Parts & Upgrades: |
Hotends |
