E3D High Flow ObXidian™ Hotend for Bambu Lab X1 and X1C Series (Complete Assembly)

Fully Assembled High Flow ObXidian™ Hotend for Bambu Lab X1 and X1C Series

E3D & Bambu Lab ObXidian High Flow hotends are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant hotends to date.

Includes:
High flow ObXidian hotend (1 pcs)
Silicone sock (1 pcs)
Hot end clip (1 pcs)
Fan (1 pcs)
Heater (1 pcs)
Thermistor (1 pcs)
Mounting bolts (2 pcs )

Note: Not compatible with the X1E

Fits:
Bambu Lab X1
Bambu Lab X1C (X1 Carbon)

Key features:
- Filament diameter: 1.75 mm
- Drop-in replacement Hotend for Bambu X1 Series
- 60% additional flowrate when compared to the standard Bambu hotend
- Patent pending high-flow technology incorporating Bondtech IP
- ObXidian™ hardened tipped nozzle
- E3DLC™ coating offers additional non-stick properties
- Officially approved & licensed Bambu product

Documentation:
High Flow ObXidian™ HotEnd for Bambu Lab Complete Assembly Guide
Bambu Lab X1 Hotend Assembly Guide
Bambu Lab P1P/P1S HotEnd Assembly Guide
High Flow ObXidian™ HotEnd for Bambu Lab Maximum Volumetric Flow Rates
Bambu Lab High Flow ObXidian Slicing Guide
Bambu Fan compliance
Bambu Lab High Flow ObXidian HotEnd Volumetric flow rate vs Layer adhesion
Example Bambu Studio Slicer Profiles
Datasheet

FAQ
What is the maximum printing temperature? 300 °C 
Can you cold pull the E3D ObX HF Bambu Hotend? Yes, you can! The ObXidian coating is designed to withstand the force of a cold pull, however it can be a little bit challenging compared to a typical nozzle due to the internal construction. 
Are there any material limitations?  Any filament you can print with our Revo and V6 ObXidian nozzles can be used with this upgrade. Typically aimed at fiber filled filaments, glow in the dark and glitter filled filaments, these nozzles should provide you a reliable choice. Short periods of metal and ceramic filled filaments can be used but may still wear over prolonged use. 
Do I need to PID tune when I upgrade to the E3D ObX HF Bambu Hotend? No, you don’t need to! 
Is this compatible with E3D Revo Nozzles? These Hotends are designed to maintain the exact same form factor as the stock Bambu nozzles and are therefore not compatible with the Revo range of nozzles. If this is something you are interested in we recommend you have a look at the Revo Panda, which is a Revo compatible Hotend by Biqu.