Ender 5 Pro

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Creality Metal Extruder Kit Color: Gray Replaceable push-fit connectorAdjustable tension for more precise control of the filamentIncludes all hardware needed for installation Fits:Ender-3 SeriesEnder-5 SeriesCR-10 Series

  Creality Metal Extruder Kit Never let a broken plastic extruder stop you again! This metal extruder upgrade will last a lot longer than the plastic stock extruder. Integrated push-fit connectorAdjustable tension for more precise control of the...

Microswiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Nozzle Size:  0.40mm Key benefits: No printer modification needed - this kit is a drop-in replacement for the CR-10. Faster heat dissipation - Microswiss has...

Nozzle for Crealty Printers D6 precision brass nozzle with M6x1 threads. For 1.75mm filament only. Size: 0.40mm Includes: Brass nozzle (1 pcs) Fits:  E3D MK8 All Creality printers that use M6x1 threads (MK8...

Nozzle for Creality Printers D6 precision brass nozzle with M6x1 threads. For 1.75mm filament only Size: 0.50mm Includes: Brass nozzle (1 pcs) Fits:  E3D MK8 All Creality 3D printers that use M6x1 threads (MK8...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Carborundum Glass Build Plate Includes: Glass build plate (1 pcs) Size: 235x235x4mm Notes:Clean with IPA (rubbing alcohol) or acetoneAllow bed to cool completely before removing print Fits:Ender-3Ender-3 V2Ender-3 KREnder-3...

Microswiss MK8 CM2 Nozzle The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains...

PB Select™ Copper Heat Break Copper and stainless steel Includes: Heat Break (1 pcs) Fits:CR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10 S5CR-100CR-100BCR20CR20...

Microswiss Lightweight Direct Drive Extruder (Extruder Only Version) This is the "extruder only" version and does not include a hotend. The Microswiss All Metal Hotend is available for purchase here  Important Note There has been an...

Microswiss Lightweight Direct Drive Extruder with All Metal Hotend This version includes a Microswiss All Metal Hotend. The "Extruder Only" version is available for purchase here.  Important Note There has been an...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extension Cable for Direct Drive Extruder Spare Extension Cable for Microswiss Direct Drive kit for CR-10 & Ender printers.  Length: 67cm

  Creality 4010 Fan This is the fan that cools the printer mainboard Includes: 4010 Fan (1 pcs) Size: 40x40x10mm Fits: Ender 3Ender 3 NeoEnder 3 ProEnder 3 V2Ender 3 V2 NeoEnder 5Ender 5 Plus

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Hardware Kit for Direct Drive Extruder Spare hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Beveled PTFE liner (1 pcs)M3 x .5 x 6mm Screws (3 pcs)M5 x .8 x 20mm Nylon Patch Screw (2 pcs)M5 x .8 x...

  Creality Stainless Steel Heat Break This is the standard heat break that allows for the PTFE tube to pass all the way through. Includes: Heat Break (1 pcs) Fits:CR-7CR-8SCR-9SCR-10miniCR-10CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10...

   Creality Heater Block Aircraft grade aluminum heater block Includes: Heater block (1 pcs) Please Note: Does not include mounting hardware, thermistor screw or set screw Fits:CR-10 miniCR-10 CR-10SCR-10 V2CR-10 V3CR-10 S4CR-10...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Limit Switch (Endstop) Includes: Limit Switch (1 pcs)  Fits:Ender-2 ProEnder-3Ender-3 SEnder-3 MaxEnder-3 ProEnder-3 V2Ender-3 NeoEnder-3 Max NeoEnder-3 V2 NeoEnder-3 S1 Ender-3 S1 PlusEnder-3 S1 ProEnder-5Ender-5 S1Ender-5 PlusEnder-5...

Main Body for Microswiss Direct Drive Extruder configured for ExoSlide System Fits: Printers with ExoSlide System Includes: 1x Main Extruder body2x M4 x .7 x 16mm ExoSlide mounting screws CNC Machined and Assembled in USA

Microswiss MK8 Wear Resistant Brass Nozzle  Size: Select Above Includes: MK8 nozzle (1 pcs) - Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction.- Offers one...

PB Select™ MK8 Brass Nozzle Precision ground brass nozzle gives a smooth consistent print. Size: Select AboveIncludes: MK8 nozzle (1 pcs) Fits:Alfawise U20Alfawise U30Anet A8Anet A8 PlusAnet ET4Anet ET5XBQ Prusa I3 HephestosBQ...

MK8 M2™ Hardened High Speed Steel Nozzle  Size: Select Above Includes: Nozzle (1 pcs) The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2...

Motor Gear for Direct Drive Extruder Spare motor gear for Micro Swiss Direct Drive kit for CR-10 & Ender printers.  Precision CNC machined teeth Hardened tool steel Includes:Gear (1 pcs)Set screw (1 pcs)Hex wrench (1 pcs)

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

X Axis Idler Wheel High hardness, wear resistant POM is CNC precision machined with no burrs or bubbles for a smooth surfaceLow noise high precision smooth roller bearingsQuieter and more wear resistant than standard rollers Includes: Roller wheel...

  PTFE liners for Microswiss Direct Drive Kits and All Metal Hotend (Pack of 5) Capricorn PTFE liners for Microswiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Runs between the extruder and hotend. Includes: PTFE...

PTFE liner for Microswiss Direct Drive Kits and All Metal Hotend Capricorn PTFE liner for Microswiss Direct Drive Kits and All Metal Hotend for CR10 and Ender printers. Includes: PTFE tube (1 pcs) Specifications:50mm long Beveled...

Creality Pneumatic Joint Set  Includes:Small push fit connector (1 pcs)Small clip (1 pcs)Large push fit connector (1pcs)Large clip (1 pcs) Fits:Ender-2Ender-2 ProEnder-3Ender-3SEnder-3 ProEnder-3 V2Ender-3 MaxEnder-4Ender-5Ender-5...

Revo Coldside Only - For Creality  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:Heatsink (1pcs)Heater...

Creality Silicone Pro Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament from...

Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...

Sock-X for E3D Revo Nozzles Nozzles not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle. These...

PB Select™ Silicone Socks - 3 Pack The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Tension Pin (1 pcs)Spring (1 pcs)Tension Knob (1 pcs) Fits: Microswiss...

Tension lever for Micro Swiss Direct Drive Extruder This is a spare tension lever for Micro Swiss Direct Drive kit for CR-10 / Ender printers.  Includes:Lever (1 pcs)Gear (1 pcs)Shoulder bolt (1 pcs) Made in the USA

  Creality Thermistor Thermistor has bare wire ends (no installed connector) and comes with heat shrink solder butt connectors. See this video for using the heat shrink solder connectors. Includes: Thermistor (1 pcs)Heat shrink solder butt...

Thermal Heat Break for Microswiss All Metal Hotend Kit Replacement heat break for Microswiss All Metal Hotend Kit Made from Grade 5 Titanium Includes: Heat break (1 pcs) FitsMicroswiss hotend for CR-10 / Ender KitMicroswiss hotend...

  Creality Yellow Bed Leveling Spring Strong bed springs for Creality and other 3D printers. Fits most Creality printers that use bed springs.  Includes: Spring (1 pcs) Dimensions:Length: 30mm (un-sprung)OD: 8.2mmID:...

Coupler - Stepper Motor to Leadscrew Includes: Coupler (1 pcs) Size:Motor Shaft: 5mmLeadscrew: 8mm Fits:CrealityArtillery

Creality 42-34 (Z) Stepper Motor Includes: Stepper motor (1 pcs) Location: Z Axis Fits:Ender-2 ProEnder-3 S1Ender-3 S2 ProEnder-3 S1 PlusEnder-3Ender-3 NeoEnder-3 V2Ender-3 V2 NeoEnder-3 MaxEnder-3 Max NeoEnder-5 ProEnder-5 PlusCR-6 SECR-6...

Aluminum Alloy Coupling - 2 Pack Anodized aluminum coupling for joining 5mm motor shaft with 8mm leadscrew. Specs: 5mm ID -side A 8mm ID - side B 13.8mm OD 25mm length Includes: Coupling (2pcs) Setscrew (2 pcs) Fits:  Ender-3...