*Clearance item - no returns

Galaxy PLA Emerald Green - 1.75mm 750g

*Color Note: Galaxy colors contain metallic-looking flakes to give a sparkling galaxy look. 

• Beautiful deep bright green color 
• Based on Formfutura's easy-to-print EasyFil PLA filament
• High aluminium-flake content gives a beautiful sparkling, glittering finish 
• Galaxy PLA is not abrasive to the nozzle of your 3D printer
• 3D print objects without visible layers
• Warp-free printing and no deformation after cooling
• Improved flowing behaviour and inter-layer adhesion
• Good first layer adhesion

Galaxy PLA Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.4mm

Layer Height: > 0.15mm

Flow Rate: ± 100%

Print Temp: ± 205 - 210° C

Print Speed: Medium

Retraction: Yes, ± 5mm

Heat Bed: ± 0 - 60° C

Fan Speed: 50-100%

Printing Surface: Blue Tape / Glass