Guider 2S HT

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

  Activated Carbon HEPA Filter Includes: Activated carbon filter (1 pcs) Fits: Guider 2S/HTRobo E3 Pro

  Flashforge Extruder Air Duct Assembly Directs air to the printed part Includes:Air Duct (1 pcs)Metal heat shield (1 pcs)Mounting screws (2 pcs) Fits: Guider 2S HTRobo E3 Pro

Air Duct Screw (M3x8) Guider 2/2S, Inventor 2, Finder Holds the plastic air duct in place. Includes: M3x8 screw (2 pcs) Fits:Guider 2Guider 2S HTInventor 2FinderRobo E3 Pro

  Flashforge Bed Leveling Card Includes: Leveling card (1 pcs)

  Flashforge Bed Leveling Hardware  For leveling the build plate.  Includes:Spring (3 pcs)Thumb Nut (3 pcs) Fits: Creator 3Creator 3 ProGuider 2Guider 2S HTRobo E3 Pro

  Flashforge Bed Leveling Sensor Switch Includes: Bed leveling sensor (1 pcs) Fits:Guider 2Guider 2S HTFinderFinder 2Inventor 2Inventor 2SRobo E3 Pro Note: This is the sensor only and does not include the arm or servo. 

  Flashforge Bed Leveling Servo Assembly Includes: Servo assembly (1 pcs)Bed sensor switch (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Bed Leveling Springs - 3 Pack Strong springs for leveling the build plate.  Includes: Spring (3 pcs) Fits: Creator 3Creator 3 ProGuider 2Guider 2S HTRobo E3 Pro

  Flashforge Replacement Drive Belt - X Axis Includes: X axis belt (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Replacement Drive Belt - Y Axis Includes: Y axis belt (2 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Blower (Turbo) Fan This is the fan that blows air on the part being printed. Includes: Fan (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Flashforge Flexible Spring Steel Build Plate System Includes:Flashforge print surface pre-installedMagnet sheet with adhesive for easy installation Spring steel flex print surface Max Temperature: 80c Fits:Guider 2S HTRobo E3 ProGuider 2...

  Flashforge Build Plate Frame Includes: Plastic frame (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro Note: You will need this plastic frame if you are installing the flexible build plate on your Guider 2. 

  Flashforge Glass Build Plate Includes: Glass build plate (1 pcs) Dimensions: 310x270x3mm Fits:Guider 2S HTGuider 2 with plastic housing upgradeRobo E3 Pro Note: If you are installing this glass on a Guider 2 you will need to...

  Flashforge PCB Build Plate Heater Includes: PCB heating board assembly (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Button for Touch Screen Includes: Plastic button (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro

  C-Clip for Y Axis Bearing Includes: C-Clip (1pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro Note: Each bearing requires 2 clips, be sure to order the quantity you need.  

  Flashforge X Limit Switch Cable (Endstop Cable)  Runs from X axis limit switch to mainboard Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge V2 Filament Sensor Cable Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro Note: This will only fit the later version of the Guider printers that have a filament sensor like this one: Guider 2 (2S) Filament...

  Flat Cable for TFT Touch Screen Connects touch screen to mainboard Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro  WARNING  Pay attention to the orientation of your current cable.Plugging this cable in...

  Flashforge X Motor Cable Runs from X axis stepper motor to mainboard Includes: Cable (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge Y Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Y Motor Cable Runs from Y stepper motor to mainboard Includes: Cable (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge Z Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Chamber Camera Includes: Camera (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: mounting screws not included.

Guider 2 Camera Bracket STL File  Printable camera bracket for Guider 2S/HT or for adding a camera to the Guider 2. Designed by NSC. Click here to download the STL file. Licensed under a Creative Commons Attribution-ShareAlike 4.0...

  Camera Connection Cable Includes: Cable (1 pcs) Fits:Guider 2S HTRobo E3 Pro

Flashforge Ceramic Eye - Filament Guide Includes: Eyelet (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)DreamerGuider 2Guider 2SGuider 2S HTInventorMonoprice VoxelRobo E3

  Flashforge Chamber Fan Includes: Chamber Fan (1 pcs)Volts: 24Size: 80x80x25mm Fits: Guider 2S HTRobo E3 Pro

  Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  Flashforge Extruder Adapter PCB Board Includes: Extruder adapter board (1 pcs)   Fits:Guider 2Guider 2SRobo E3 Pro

  Extruder Cover Includes: Cover (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro Note: Mounting hardware not included.

  Flashforge Extruder Cable Runs from the mainboard to the extruder. Includes: Flat Cable (1 pcs) Fits:Creator 3Creator 3 ProGuider 2Guider 2S HTRobo E3 Pro

  Flashforge Extruder Lever Assembly - Left Side  Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1...

   Used Item  Removed from low hour 3D printers Flashforge Extruder Lever Assembly - Left Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1...

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max...

Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...

 Used Item  Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...

  Flashforge 3010 Fan Includes: Fan (1 pcs)Voltage: 24 VDCSize: 30x30x10mm Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4Adventurer 4 ProGuider 2Guider 2S HTCreator 3 ProRobo E3Monoprice Voxel

  Flashforge 4010 Fan Includes: Fan (1 pcs) Voltage: 24VDC Size: 40x40x10mm Fits: Creator 3Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steel filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...

  Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator...

  Flashforge Filament Guide Tube Includes: PTFE tube (1 pcs) Fits: Guider 2Guider 2S HT

Flashforge Filament Sensor Includes: Filament Sensor (1 pcs) Fits: Guider 2Guider2S HTFinder 3Robo E3 Pro Note:This is the V2 filament sensor. Check the photo and make sure it matches your current sensor.Does not include the white PTFE bushing...

  Flashforge Filament Sensor Bracket This bracket is for the V2 filament sensor Includes: Bracket (1pcs) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Filter Cover Holds the Carbon and HEPA filters Includes: Filter Cover (1pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge Flange Bearing (F105ZZ) Includes: Flange bearing (1 pcs) Specifications:ID: 5mmOD: 10mmW: 4mmF: 11.5mm Fits:DreamerDreamer NXCreator ProCreator Pro 2Creator MaxCreator Max 2InventorInventor 2Guider 2Guider 2S HTRobo E3 Pro

  Flashforge 625ZZ Flange Bearing Includes: Flange bearing ( pcs) Location: Y axis Specifications:ID: 5mmOD: 16mmW: 5mm Fits:Creator 3Guider 2Guider 2S HTRobo E3 Pro

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

  Flashforge Heat Break (Threaded Pipe)  Includes: Heat break (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge Heater Block Includes: Heater block (1 pcs)Clamping screw (1 pcs) Fits: Guider 2S HTRobo E3 Pro

Socket Head Cap Screw - Low Head - Stainless Steel  Used to clamp the heater cartridge in the heater block Includes: Socket Head Cap Screw - Low Head (4 pcs) Size: M3x8 Fits:Guider 2S HTCreator Pro 2Creator Max 2Robo E3 Pro

  Heat Resistant Insulation  Includes: Insulation (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: To attach this to the heater block you will need 5mm Kapton tape (not included) available here.

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Volts: 24Watts: 40 Fits:Finder (24 volt)Finder 2Guider 2Guider 2S HTInventor 2Inventor 2SRobo E3 Pro

  Flashforge Hotend Heatsink Includes: Heatsink (1 pcs) Fits: Guider 2S HTRobo E3 Pro Note: Does not include set screw.

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

  Flashforge High Temp Hotend Assembly Includes:Heatsink (1 pcs)Heat break (1pcs)PTFE tube (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermocouple (1 pcs)Hotend insulation (1 pcs)Nozzle - 0.40mm (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Flashforge High Temp Hotend Assembly with Hardened Steel Nozzle This version includes a hardened steel nozzle for longer life. Includes:Heatsink (1 pcs)Heat break (1pcs)PTFE tube (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermocouple...

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 2Guider 2S HTCreator 3Robo E3 Pro

  Flashforge Limit Switch Includes: Limit Switch (1 pcs) Location: X, Y or Z axis Fits:Finder 3Guider 2Guider 2S HTInventorRobo E3 Pro Fitment Note: Fits different locations on different printers. Make sure the switch in the picture...

MYT LM10UU Linear Bearings Includes: Linear Bearing (4 pcs) Specifications:ID: 10mmOD: 19mmL: 29mm Fits:Guider 2 (X/Y axis)Guider 2S HT (X/Y axis)Prusa MINIPrusa MINI+Sovol SV06 PlusRobo E3 ProOther printers that use LM10UU linear bearings

  Flashforge Linear Rod - Y Axis Includes: Linear rod (1 pcs)  Location: Y Axis Fits:Guider 2Guider 2S HTRobo E3 Pro

  Please read our returns policy regarding electronic items Flashforge Guider 2S HT Mainboard Includes: Mainboard (1 pcs) Fits: Guider 2S HT

Flashforge Metal Hotend Cover Metal shroud fits inside the hotend air duct and protects the heater block. Includes: Hotend shroud (1 pcs) Fits:Guider 2Guider 2S (HT)Inventor 2/SFinder/2Robo E3 Pro

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...

  Shock Absorbing Motor Mount For the Y axis stepper motor Includes: Motor mount (1 pcs) Fits:Creator 3Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Hardened Steel Nozzle Includes: Hardened steel nozzle (1 pcs) Orifice Size: 0.40mm Fits: Guider 2S HTRobo E3 Pro This nozzle is more abrasion resistant for printing carbon fiber filled or other abrasive filaments...

  Flashforge Hardened Steel Nozzle Includes: Hardened steel nozzle (1 pcs) Orifice Size: 0.60mm Fits: Guider 2S HTRobo E3 Pro This upgraded nozzle is more abrasion resistant for printing carbon fiber filled or other abrasive...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

  Flashforge Brass Nozzle Includes: Brass nozzle (1 pcs) Orifice Size: Select Above Fits: Guider 2S HTRobo E3 Pro Does not include PTFE tube

PEI Print Surface Adhesive backed. Can be cut to size for smaller beds. Includes: PEI Sheet (1 pcs) Specifications:Material: ULTEM™ 1000Dimensions: 264x306mmThickness: 175um Fits: Guider 2Guider 2S HTGuider 3 -  Note: this is a...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

  Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Guider 2SRobo E3 Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator...

  Flashforge Replacement Power Supply (PSU) Includes: Power supply (1 pcs) Fits: Creator 3Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy application Includes: Print Surface (1 pcs) Size: 263x307mm (can be trimmed to fit other printers) Fits:Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Hotend/Nozzle PTFE Tube This the PTFE tube that goes inside the heatsink.  Includes: PTFE tube for hotend (1 pcs) Length: 26.75mm Fits: Guider 2S HTRobo E3 Pro

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)29mm shaft (1 pcs)10mm Flange Bearing (2 pcs)E-clip (2 pcs) Location: X axis Fits:Guider 2Guider 2S HTRobo E3 Pro Note: This pulley uses 10mm flange bearings and will...

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)35mm shaft (1 pcs)Spacer (1 pcs)10mm Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y-Axis Fits:Guider 2Guider 2S HT Note: These pulleys use 10mm flange bearings and only...

  Flashforge Y Axis Drive Pulley Assembly This is the drive pulley with coupler for the newer style stepper motor/shaft. This uses a coupler (included) to connect the drive shaft to the pulley assembly. Includes: Pulley Assembly (1...

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with rectangular opening for spool holder)

   Used Item  Cables are removed from low hour 3D printers. Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with...

  Flashforge Stepper Driver Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits:Guider 2 (All Axis)Guider 2S HT (Z Axis Only)Robo E3 Pro Stepper driver may look different than pictured

  Replacement Stepper Driver Includes:Stepper Driver (1 pcs)Heatsink (1 pcs) Fits: Creator Pro 2 (XA1, XB1 location)Guider 2S HT (X/Y & Extruder Only - NOT for Z Axis)  WARNING Do not install in Z axis location on the Guider...

  Flashforge Extruder Stepper Motor Includes: Motor (1 pcs) Location: Extruder Fits: Guider 2S HTRobo E3 Pro

  Flashforge X Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: X axis Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge Y Axis Stepper Motor (V2) Includes: Motor (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro Notes: This Y motor is for the later version of the Guider 2 and 2S HT. The later version uses a coupler to connect the left side...

  Flashforge Z Axis Stepper Motor Includes:Z axis motor with leadscrew (1 pcs)Leadscrew nut (1 pcs) Fits: Guider 2Guider 2S HTRobo E3 Pro

  Flashforge X Axis Stepper Motor Includes:Stepper motor (1 pcs)Drive pulley (1 pcs) Fits: Guider 2S HTRobo E3 Pro

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...