Guider 3 Plus

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

  Flashforge Hotend Air Duct Directs air to the part being printed. Installs on either the left or right side.  Includes: Air duct (1pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: Does not include mounting screws

  Flashforge Air Filter HEPA and charcoal air filter. Includes: Filter (1 pc) Fits:Adventurer 4Robo E4 ProGuider 3Guider 3 PlusCreator 3Creator 3 Pro

  Flashforge Blower (Turbo) Fan This fan cools the part being printed Includes: Fan (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Flashforge Build Plate Heater Includes: Silicone Heater (1 pcs) Fits: Guider 3 Plus

  Flashforge Bed Leveling Sensor Switch Includes: Sensor (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge Filament Box Cable Includes: Cable (1 pcs) Fits: Guider 3 Plus

  Chamber Fan (120x120x25mm) This is the chamber fan that is located behind the HEPA filters. Includes: Fan (1 pcs) Fits: Creator 4Guider 3 PlusGuider 3 Ultra

  Please read our returns policy regarding electronic items Flashforge Driver Board Includes: Driver Board (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

  EMI Filter Includes: EMI Filter (1 pc) Fits:Guider 3 PlusGuider 3 Ultra

  Flashforge Extruder Assembly  Includes: Extruder assembly with 0.40mm nozzle (1 pcs) Fits: Guider 3 Plus Does not fit standard Guider 3

  Flashforge Extruder Cable Runs from mainboard to extruder. Includes: Extruder cable (1 pcs) Fits: Guider 3 Plus

  Flashforge Extruder PCB Board  Includes: Adapter board (1 pcs) Fits: Guider 3 Plus

  Flashforge 30x10mm Cooling Fan Includes: Fan (1 pcs) Locations:Guider 3/3 Plus: Upper extruder coolingFinder 3: Heatsink coolingRobo E4 Pro: Upper extruder cooling Fits:Finder 3 Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge 40x10mm Extruder Cooling Fan This fan cools the lower part of the extruder. Includes: Fan (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: This is not the print cooling fan

  Filament Box Filament box for the Guider 3 Plus 3D Printer.  Includes: Filament box (1 pcs) Fits: Guider 3 Plus Note: LR44 battery (not included) required for humidity gauge.Does not include desiccant.

  Filament Drive Gear Includes:Filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro    

Flashforge Filament Sensor Includes: Filament Sensor (1 pcs) Fits: Guider 3 Plus

  Textured PEI Flexible Build Plate  Flexible build plate with textured PEI (powder coated) print surface on one side.  Includes: Build plate (1 pcs) Fits: Guider 3 Plus

  Flashforge Flexible Build Plate Includes:Flexible steel sheet (1 pcs)Print surface - installed (1 pcs) Fits: Guider 3 Plus

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

Flashforge Hardened Steel Nozzle Hardened steel nozzles for printing with abrasive materials  Includes: Nozzle of selected size (1 pcs) Material: Hardened Steel Fits:Guider 3Guider 3 PlusCreator 3 Pro (does not fit standard Creator...

  Flashforge Hardened Steel Nozzle Set This upgraded nozzle set is more abrasion resistant for printing carbon fiber filled and other abrasive filaments. Includes:0.40mm (2 pcs)0.60mm (2 pcs)0.80mm (2 pcs) Fits: Guider 3Guider 3 PlusCreator...

  Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro  Note: Does not include the M4x3mm set screw for securing heater cartridge. The set screw may be purchased here. 

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge Heatsink Includes: Heatsink (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro Note: Does not include setscrew for holding heat break or other mounting hardware.

  Flashforge Hotend (Nozzle) Assembly  Includes: Hotend assembly (1 pcs) Nozzle Size: 0.40mm  Fits: Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge LED Board - Light Strip Includes: LED light board (1 pcs) Fits:Guider 3Guider 3 PlusGuider 3 UltraRobo E4 Pro Creator 4

  Flashforge Limit Switch (Endstop) Includes: Limit switch (1 pcs) Fits:Guider 3 (Y/Z)Guider 3 Plus (Y/Z)Creator 4 (X/Y)Robo E4 Pro (Y/Z)

  Please read our returns policy regarding electronic items 7" Touch Screen and Mainboard Includes: Touch Screen (1 pcs)Mainboard (1 pcs) Fits: Guider 3 Plus Note: Does not include driver board.  WARNING  The mainboard...

  Microswiss Wear Resistant Nozzle (Plated Brass) Made from a 360 brass base material and plated with TwinClad XT coating.TwinClad XT coating is a nickel composite designed for very low friction. It offers one of the lowest coefficient of...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

  Extruder to Nozzle Connection Board  This is the board with the female (concave) connector that attaches to the extruder side.  Includes: Connection board (1 pcs) Fits: Guider 3Guider 3 PlusRobo E4 Pro 

  Nozzle to Extruder Connection Board  This is the board with the male (convex) connector that attaches to the nozzle assembly.  Includes: Connection board (1 pcs) Fits: Guider 3Guider 3 PlusRobo E4 Pro

  Flashforge Stainless Steel Nozzle Set Includes:0.40mm (2 pcs)0.60mm (2 pcs)0.80mm (2 pcs) Fits: Guider 3Guider 3 PlusCreator 3 Pro (does not fit standard Creator 3)Creator 4Robo E4 Pro 

  Flashforge Nozzle Temperature Sensor (Thermocouple) Includes: Temperature sensor (1 pcs) Fits:Guider 3Guider 3 PlusRobo E4 Pro

  Flashforge Print Surface (Bed Tape) Adhesive backed for easy installation Includes: Print surface sheet (1 pcs) Fits: Guider 3 Plus

Stainless Steel Nozzle Includes: Nozzle of selected size (1 pcs) Material: Stainless Steel Fits:Guider 3Guider 3 PlusCreator 3 Pro (does not fit standard Creator 3)Creator 4Robo E4 Pro

  Flashforge X/Y Motor Includes: Stepper motor (1 pcs) Fits: Guider 3Guider 3 PlusRobo E4 Pro 

  Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs) Fits: Guider 3 Plus

  Hotend Support Pins These pins go between the heater block and heatsink. Includes: Pin (6 pcs) Fits:Creator 3 ProGuider 3Guider 3 PlusRobo E4 Pro Note: Hotend in picture is not included

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge USB Interface PCB Board (USB Port) Includes: USB board (1 pcs)   Fits: Adventurer 4Guider 3 Plus