Hardware

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

M2 Brass Thread Insert - 4 Pack Thread Size: M2 OD: 3mm Length: 3mm Recommended hole diameter: 2.9 mm Includes: 4 thread inserts For easy installation use the Heat-Set Insert Soldering Iron Tips

M2.5 Brass Thread Insert - 4 Pack Heat-Set or also called hot-melt thread inserts Size: M2.5 Diameter: 3.55mm Length: 4mm Recommended hole diameter: 3.10 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

M3 Brass Thread Insert - 4 Pack Size: M3 OD: 4.6mm Length: 5mm Recommended hole diameter: 4.0 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits:3030 extrusionPrusa...

M4 Brass Thread Insert - 4 Pack Size: M4 OD: 6mm Length: 5mm Recommended hole diameter: 5.25 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

M4 Leaf Spring T-Slot Nut Plated roll-in t-slot nut with leaf spring. Includes: M4 T-Slot Nut (1 pcs) Size:(Measured by hand - sizes are approximate)Length: 18.5mmWidth: 12mmHeight: 6.5mm Fits: Prusa XL (spool holder)

M5 Brass Thread Insert - 4 Pack Size: M5 OD: 7.5mm Length: 6mm Recommended hole diameter: 6.75 mm For easy installation use the Heat-Set Insert Soldering Iron Tips

Bondtech M5x10 low head cap screw for Bondtech Extruders, to be used with the M5 thread inserts or similar. Sold in units of one

M6 Brass Thread Insert - 4 Pack Size: M6 OD: 9mm Length: 6mm Recommended hole diameter: 8mm For easy installation use the Heat-Set Insert Soldering Iron Tips

M4X5 Set Screw 12.9 Grade, Flat Point. Includes: Set Screw (1 pcs)   Fits: BLTouch Uses 2mm Hex Key Driver

M3x2 Set Screw for Bondtech Extruder M3x2 set screw for primary gear with inner diameter of 5mm. Hard 12.9 Grade for durability. Sold in pack of 5    

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X3 Set Screw 12.9 Grade Sold in a 4 pack    

M4x3 Set Screw for Bondtech Extruder M4x3 for primary gear with inner diameter of 8mm. 12.9 Grade Sold in units of one  

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.