Fluor Clear Stained HDglass PETG by Formfutura

Slightly Translucent. Heavy duty premium PETG filament that prints with a beautiful high gloss finish and shine.

HDglass Filament Print Settings

These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them.

Nozzle Size: ≥ 0.15mm

Print Temp: ± 220-260 C

Bed Temp: ± 60 - 80° C

Fan Speed: 30-100%

Print Speed: High

Retraction: Yes, ± 2.5-6mm

Print Surface: BuildTak, Kapton Tape. Use a coat of Dimafix, if needed.