Magigoo Pro PA (Nylon) Print Bed Adhesive | 50ml

Magigoo Pro PA 3D Printing Adhesive

Magigoo Pro PA is designed for professional use, to work with a wide number of PA types.
The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

Size: 50ml 

Includes: Magigoo Pro PA (1 bottle)

Works with: Nylon (PA, Polyamide)

 WARNING  Do not squeeze the bottle to avoid applicator popping off.

Application:
Shake the bottle.
Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Print according to the filament/printer manufacturers recommendations.

Print Removal:
The part should become easier to remove on cooling.
If the part cannot be easily removed by hand, a part removal tool can be used to gently lift the part off the build-plate.
When using a brim, it is advisable to first peel off the brim around the part and then attempt to remove the print.

Cleaning:
Use a damp cloth to wipe off all the goo residues until a clean surface is visible.
To avoid cross contamination between adhesives we recommend wiping the glass build-plate once more after rinsing the cleaning cloth with water.
Only use water to clean off Magigoo residues, other solvents will not work as well as water or at all!

Magigoo Manual - This manual has some great info on bed adhesion.
SDS
TDS