OrangeStorm Giga

OrangeStorm Giga 5020 Axial Fan with Fork Connectors Includes: Fan (1 pcs) Size: 50x50x20mm  Fits: Elegoo OrangeStorm Giga Note: This fan has fork connectors, please check your current fan to make sure the connectors are the same...

OrangeStorm Giga 5020 Axial Fan (with XH254 2 Pin Connector) Includes: Fan (1 pcs) Specs: 50x50x20mm24VDC0.20AXH254 Connector Fits: Elegoo OrangeStorm Giga Note: This fan has XH254 2 Pin connector, please check your current fan to make...

X Axis Limit Switch Cable for OrangeStorm Giga Includes: Cable (1 pcs) Fits: Elegoo OrangeStorm Giga

OrangeStorm Giga Camera Includes: Camera (1 pcs)Mounting hardware (1 pcs)USB cable (1 pcs) Fits: Elegoo OrangeStorm Giga

CAN Bus Cable for Elegoo OrangeStorm Giga Includes: CAN bus cable (1 pcs)  Fits: Elegoo OrangeStorm Giga

OrangeStorm Giga 4010 Axial Fan for Toolhead Heatsink Includes: Fan (1 pcs) Specs: 40x40x10mm DC24V0.10A Fits: Elegoo OrangeStorm Giga

OrangeStorm Giga Filament Feeder This assembly contains the gears that drive the filament through the nozzle. It is also known as an extruder. Includes: Filament feeder (1 pcs)PTFE tube (1 pcs) Fits: Elegoo OrangeStorm Giga

OrangeStorm Giga Filament Spool Holder Includes: Filament spool holder (1 pcs)Spool holder bracket (1 pcs)Screws (2 pcs) Fits: Elegoo OrangeStorm Giga

This is a non returnable item. Please be sure you are choosing the correct heater number (#) using the table below. If you are not sure, please email us before purchasing.  Heated Build Plate Assembly for OrangeStorm Giga Ships assembled...

OrangeStorm Giga Assembled Hotend  Ships fully assembled and ready to install.  Includes: Heatsink (1 pcs)Heat break (1 pcs)Fan w/ standoffs (1 pcs)Heater block (1 pcs)Nozzle heater (1 pcs)Nozzle thermistor (1 pcs)0.60mm...

OrangeStorm Giga Limit Switch Includes: Limit switch (1 pcs) Fits: Elegoo OrangeStorm Giga

OrangeStorm Giga Mainboard  This is sometimes called the control board or motherboard. Includes: Mainboard (1 pcs) Fits: Elegoo OrangeStorm Giga

Nozzle Heater Includes: Heater (1 pcs)  Fits: Elegoo OrangeStorm Giga

Elegoo OrangeStorm Giga Nozzle  Includes: Nozzle of selected size (1 pcs)  Fits: OrangeStorm Giga

OrangeStorm Giga PCB Board Includes: Transfer board (1 pcs) Fits: Elegoo OrangeStorm Giga

PEI Liquid Glue for Build Plate (Print Bed Adhesive) - 2 Pack  Includes: 60mL print bed glue (2 bottles) Works with: ABS, PLA, PETG, ASA

Elegoo Orange Storm Giga PEI Build Plate Single sided, textured PEI build plate.  Includes: Build plate (1 pcs) Size: 410x410mm Fits: Elegoo Orange Storm Giga

Power Supply for OrangeStorm Giga 24v, 400w power supply Includes: Power supply (1 pcs) Fits: Elegoo OrangeStorm Giga  Important  Be sure to adjust the switch on the side of the power supply to the correct voltage (115V/230V)...

OrangeStorm Giga Fan Assembly Includes:Print cooling fan (2 pcs)Air duct (2 pcs)Sensor (1 pcs)Led light (1 pcs)Mounting bracket (1 pcs) Fits: Elegoo OrangeStorm Giga

Print Cooling 5015 Blower Fan for OrangeStorm Giga  This fan cools the part being printed Includes: Fan (1 pcs) Specs: 50x50x15mm24VDC0.50A Fits: Elegoo OrangeStorm Giga