Description
Polymaker PolyMide™ CoPa (nylon)
PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.
Color: Black
Diameter: 1.75mm
Weight: 750g
Note: Use of a wear resistant nozzle is recommended
Print Settings
Nozzle: 250˚C – 270˚C
Bed: 25˚C – 50˚C
Fan Speed: Off
Print Speed: 30mm/s – 50mm/s
Print Surface: Glass, PEI, BuildTak with a coat of Magigoo Pro PA
Direct Drive: Retraction Distance: 3mm
Indirect Drive: Retraction Distance: 6mm
Annealing settings: 80˚C for 6h
Drying settings: 100˚C for 8 hours (only if the material has absorbed moisture)
Mechanical Properties
Young’s Modulus: 2223 ± 199 (MPa)
Tensile Strength: 66.2 ± 0.9 (MPa)
Bending Strength: 97.0 ± 1.1 (MPa)
Charpy Impact Strength: 9.6 ± 1.4 (kJ/m2)
Thermal Properties
Glass Transition Temperature: 67 ˚C
Vicat Softening Temperature: 180 ˚C
Melting Temperature: 190 (°C)
Additional Information
Series: |
PolyMide™ |
Material: |
Nylon |
Diameter: |
1.75 mm |
Weight: |
750g |
Color: |
Black |
