MINI/+

Anti-slip Pad Set  Includes: Anti-slip pad (6 pcs) To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa MINI Bearing Clips Includes: Bearing Clip (3 pcs)Screws (6 pcs)Nyloc Nuts (6 pcs) Note: Bearings not included. Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

HEPA Filter for Prusa Enclosures Includes: HEPA filter (1 pcs) Fits:Prusa MINI EnclosurePrusa i3 MK Series Enclosure Prusa XL EnclosurePrusa HT90Core One To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Leadscrew Trapezoid Nut - Prusa MINI Compatible This POM leadscrew nut from LDO Motors is comparable to the OEM part.  Includes: Trapezoid nut (1 pcs) Specifications:Material: POM / AcetalThread: Tr8x8 Fits:MINIMINI+ To replace this...

PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10...

M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits:3030 extrusionPrusa...

PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MINIPrusa MINI+ To replace this part, please...

Prusa MINI PTFE Fitting PTFE Fitting for PTFE tube extruder and heatsink connections Includes: PTFE Fitting (1 pcs) Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PC4-M8 Push Fit Connector For use with Capricorn or similar PTFE tubing. Includes: Push Fit Connector (1 pcs) Fits:Prusa MINIPrusa MINI+ Notes:The internal depth of this fitting is not as deep as the stock fitting, so you may need to...

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

Spare Parts Bundle (MINI+) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa MINI+ printer. Includes:Linear MISUMI bearing LMU8 (7 pcs)MINI+ Fasteners (spare bag) (1...

PB Select™ Spacers for Prusa Heated Bed - Pack of 2 Includes: Stainless steel bed spacer (2 pcs) Fits:MK2MK2SMiniMini+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

PB select™ Steel Ball & Magnets for Prusa Filament Runout Sensor and MMU3 Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm magnetic steel ball (1 pcs)

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ U-Bolt Includes:U-bolt (1 pcs)Nylock nuts (2 pcs) Specifications:Thread: M3Length: 26 mmThread length: 7mmDistance between center of both tips: 20 mmInside bend diameter: 16.5mm Fits:MK2SMK2.5MK2.5SMK3MK3SMINI To replace this part,...