Description
Double-Sided textured PEI powder-coated spring steel sheet
Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.
Attributes:
Scratchproof, hard to damage
Transfers texture to prints
More forgiving Live Adjust Z setting
No need for Windex with PETG
No need for glue stick with FLEX
Prints automatically detach after sheet cools down
First layer can be more squished compared to smooth sheets
Important:
Acetone causes the surface to quickly deteriorate
PLA prints with a small contact area may need a brim
PLA prints with a huge footprint may warp
Need to change Live Adjust Z if you also own Smooth PEI sheet
WARNING
Never clean the powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in the Prusa knowledge base.
Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
Fits:
Prusa MK2.5
Prusa MK2.5S
Prusa MK3
Prusa MK3S
Prusa MK3S+
Prusa MK3.9
Prusa MK3.9S
Prusa MK4
Prusa MK4S
Additional Information
PSC: |
Print Surface & Build Plate Parts |
Brand Name: |
Prusa Research |
