Prusa

Prusa MINI PTFE Tube - Extruder to Print head  Runs from the extruder to the print head. Includes:Extruder-Print head PTFE tube (1 pcs) Swivel nut (2 pcs)Pressed olive part (2 pcs) Specifications:Length: 275 mmInner diameter: 2 mmOuter...

Pre-Extruder PTFE Tube This PTFE tube runs from the extruder to filament spool. Included: PTFE tube (1 pcs) Specifications:Length: 150 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly...

PB Select™ Filament Sensor Cover PTFE Tube for Prusa 3D Printers This is the replacement PTFE tube for filament sensor cover plastic part. It is ONLY compatible with the MK2.5 and MK3.  Includes: PTFE tube for filament sensor cover...

  Prusa MINI Hotend PTFE Tube This is the hotend PTFE tube. Includes: PTFE tube (1 pcs) Specifications:Length: 43.4 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ Note: This is ONLY compatible with the Original Prusa MINI and...

Prusa Hotend PTFE Tube This is the replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Note: This is only compatible with the MK2.5S, MK3S and MMU2S hotends. It is not compatible with the MK2.5, MK3 and MMU2 hotends...

Prusa Hotend PTFE Tube Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 50 (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK2MK2SMK2.5MK3MMU2 Note: Not compatible with the MK2.5S, MK3S, MK3S+ or MMU2S...

Prusa Hotend PTFE Tube This is a replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 42.3 mm (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK3S+MK3S+ with MMU2SMK3S+ with...

Pulley Motor Includes: Pulley motor (1 pcs) Specifications:Connector: MOLEX 50-57-9404Rated current: DC 1A Fits:MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

PC4-M8 Push Fit Connector For use with Capricorn or similar PTFE tubing. Includes: Push Fit Connector (1 pcs) Fits:Prusa MINIPrusa MINI+ Notes:The internal depth of this fitting is not as deep as the stock fitting, so you may need to...

RAMBo Mini Mainboard Please read our returns policy regarding electronic items This RAMBo Mini is made by Ultimachine in the USA and comes with the selected firmware pre-installed. This is a direct replacement for the stock mainboard. UltiMachine is...

Raspberry Pi Zero 2W for PrusaLink This is the Zero 2W version which is more powerful than the standard Zero W version.  Add PrusaLink functionality to your printer and/or add your printer to Prusa Connect. The Raspberry Pi Zero 2W allows you...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6Prusa i3RepRap

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Prusa MINI/+  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:Collet (1 pcs)Collet...

Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...