Robo C2 - Final Clearance
Robo 3D Legacy Parts Final Clearance
We are clearancing out the last of our legacy Robo 3D printer parts.
- Discounted parts are final sale and may not be returned
- Discount applied in cart
- Discount is on Robo brand parts only
- Does not apply to parts already on sale
- Discount applies to parts for the Robo R1, R2 & C2 printers only
- All remaining R1, R2 & C2 parts will be discontinued & removed from our website on December 29th
- Sale is only while supplies last, no rainchecks or backorders
-
140mm x 140mm Print Surface (3 Pack) for Robo C2
Robo 3D
$19.95140mmx140mm Print Surface Adhesive backed for easy application Includes: Print surface (3 pcs) Fits: Robo C2$19.95 -
On Sale
3.5 inch Touch Screen (HDMI) | Waveshare
Robo 3D
Now: $24.98Regular Price: $49.953.5 inch HDMI IPS Touch Screen Includes: Screen (1 pcs) Fits: Robo C2 with an HDMI Connection Note: This is the HDMI version. Make sure your current screen uses an HDMI connection. Older C2s use the non-HDMI screen.Now: $24.98Regular Price: $49.95 -
On Sale
6025 Dual Ball Bearing Axial Fan - 12VDC, 0.20A (60x60x25mm)
Robo 3D
Now: $8.99Regular Price: $13.956025 Dual Ball Bearing Fan Includes: Fan (1 pcs) Specs:Dual Ball Bearing12VDC0.20ALead Length: 270mm (Approximately)Plug Type: 2510 2.54mm 2 Pin Size: 60x60x25mm Note: Brand will either be Son Times or The Source of the WindNow: $8.99Regular Price: $13.95 -
Bed Leveling Hardware (2 Pack) - R2 | Robo 3D
Robo 3D
$5.95Robo R2 Bed Leveling Hardware - 2 Pack Includes:Thumb nut (2 pcs)Springs (2 pcs)Bolts (2 pcs) Fits:Robo R2Robo C2$5.95 -
Bed Magnets (2 Pack) - R2, C2 | Robo 3D
Robo 3D
$2.95Robo R2/C2 Bed Magnets Includes: Magnets (2 pcs) Fits:Robo R2Robo C2$2.95 -
Bed Nuts (2 Pack) R2, C2 | Robo 3D
Robo 3D
$1.75Robo R2/C2 Bed Nuts Includes: Screws (2 pcs) Fits:Robo R2Robo C2$1.75 -
Belt Tensioner Spring - R2, C2 | Robo 3D
Robo 3D
$2.49Robo R2/C2 Belt Tensioner Spring Includes: Spring (1 pcs) Fits:Robo R2Robo C2$2.49 -
Build Plate - C2 | Robo 3D
Robo 3D
Regular Price: $19.95$14.95Robo Build Plate with Magnets Includes: Build plate (1 pcs)Magnets - installed (4 pcs) Fits: Robo C2 Notes:This recent batch of beds arrived with some scuffing & visual imperfections on front and back (see photo for an example), so we have...Regular Price: $19.95$14.95 -
Bushing Block (Carriage Bracket) - R2, C2 | Robo 3D
Robo 3D
$6.99Robo R2/C2 Bushing Block Also known as the carriage bracket Includes: Bushing block (1 pcs) Fits:Robo R2Robo C2 Use with R2/C2 Bushings Note: Once installed, it is not possible to remove the bushing blocks without damaging them.$6.99 -
Cable (Ribbon) Mainboard to Extruder - C2 | Robo 3D
Robo 3D
$8.95Ribbon cable for Robo C2 Runs from mainboard to extruder assembly. Includes: Cable (1 pcs) Fits: C2$8.95 -
Cable - Heater Cartridge - MB to Uptown Board - C2 | Robo 3D
Robo 3D
$5.95Mainboard to Uptown Board Wire (cable) This cable runs from the C2 mainboard to the extruder heater connection on the uptown board. Includes: Cable (1 pcs) Fits: C2$5.95 -
Cable - IR Sensor to Downtown Board - R2, C2 | Robo 3D
Robo 3D
$2.95Cable - IR Sensor to Downtown Board For connecting IR Bed Level Sensor to Downtown Board Includes: Cable (1 pcs) Fits: Robo R2Robo C2$2.95 -
Cable - Uptown to Extruder Motor - R2, C2 | Robo 3D
Robo 3D
$3.95Extruder Motor Cable for Robo R2 and C2 3D Printers Includes: Cable (1 pcs) Fits: R2C2$3.95 -
$6.95 -
Cable - Z Motor to Mainboard - R2, C2, R1/+ | Robo 3D
Robo 3D
$6.95Z Motor Cable This cable is for the R2, but also works for the C2 and R1/+ Includes: Cable (1 pcs) Length: 600mm Fits: R2C2R1/+$6.95 -
Cable for X Motor - R2, C2, R1/+ | Robo 3D
Robo 3D
$7.95X Stepper Motor Cable for Robo 3D Printers This cable is for the R2 X motor but also fits the Robo C2 and R1/+ Includes: Cable (1 pcs) Length: 700mm Fits: R2C2R1R1+$7.95 -
Cable Set - X/Y Endstop - C2 | Robo 3D
Robo 3D
$7.95C2 X/Y Endstop Cable Set Includes: Cable (1 pcs) Fits: C2$7.95 -
On Sale
Copper Nozzle - M6 RepRap, Prusa, E3D V6, Etc.
PB Select™
$9.98 - $14.95PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...$9.98 - $14.95 -
Downtown Board - R2, C2 | Robo 3D
Robo 3D
$15.95Replacement Downtown Board for Robo R2 and C2 3D printers Includes:Downtown board (1 pcs)Screws (3 pcs) Fits:Robo R2Robo C2 Additional mounting screws sold here$15.95 -
Downtown Board Screw Set - R2, C2 | Robo 3D
PB Select™
$1.00Downtown Board Screw Set For mounting the Downtown board. Includes: Screws (3 pcs) Fits:Robo R2Robo C2$1.00