Robo R1

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which requires 6mm...

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

608ZZ Roller Bearing Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm Fits:Robo R1+Prusa MINIPrusa MINI+Prusa MMU2S

608ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm

Robo R1+ Heated Bed Connection Cable  You will need this extension cable if you are upgrading from a v1 bed (with a long cable) to the v2 bed (which has a short cable).  Includes: Cable (1 pcs) Fits: Robo R1+ with v2 bed

Robo R1+ X Axis Belt Includes: Belt (1 pcs) Location: X axis Length: 810mm Fits:Robo R1Robo R1+

Robo R1+ Y Axis Belt  Includes: Belt (1 pcs) Location:  Y axis Length: 500mm Fits: Robo R1Robo R1+ 

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Extra FlexPlate Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. - Specially-coated FlexPlates are resistant to rust and work on...

SD to RAMPs cable Connects SD card reader to RAMPs board. Includes: Cable (1 pcs) Fits:Robo R1Robo R1+

Cable for Extruder Motor  Runs from extruder motor to mainboard of Robo R1+  Includes: Cable (1 pcs) Fits: Robo R1+Robo R1

Power Supply Cable This cable runs from the power inlet to the power supply of the Robo R1+ Includes:  Cable (1 pcs) Fits:Robo R1Robo R1+

R1+ Fan Cable (Wire) Runs from mainboard to print cooling fan. Will also work for the heatsink cooling fan, but the wires will need to be reversed or the fan runs backwards.  Includes: Cable (1 pcs) Fits: R1+

R1+ Thermistor Cable (wire) Runs from mainboard to thermistor.Will also work for the heatsink fan or print cooling fan but pay attention to the orientation of the plug (at the mainboard) so the fan does not run backwards. Includes: Cable...

Cable (wire) for X endstop limit switch Includes: Cable (1 pcs) Fits: Robo R1Robo R1+

X Stepper Motor Cable for Robo 3D Printers This cable is for the R2 X motor but also fits the Robo C2 and R1/+ Includes: Cable (1 pcs) Length: 700mm Fits: R2C2R1R1+

Cable (wire) for Y endstop limit switch Includes: Cable (1 pcs) Fits:Robo R1Robo R1+