Robo R2

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

R2/C2 Bed Sensor Includes: IR sensor (1 pcs)

Robo R2 Bed Leveling Hardware - 2 Pack Includes:Thumb nut (2 pcs)Springs (2 pcs)Bolts (2 pcs) Fits:Robo R2Robo C2 

Robo R2/C2 Bed Magnets  Includes: Magnets (2 pcs) Fits:Robo R2Robo C2

Robo R2/C2 Bed Nuts Includes: Screws (2 pcs) Fits:Robo R2Robo C2

Artillery Closed Loop GT Belt Includes: Belt (1 pcs) Size:Length: 600mmWidth: 6mm Fits:GeniusGenius ProAlso Fits the Robo R2

Robo R2 X/Y Motor-to-Pulley Belt This is the short vertical belt that runs from the stepper motor to the X/Y pulley. Includes: Belts (2 pcs) Length: 192mm Fits: R2  

Robo R2/C2 Belt Tensioner Spring Includes:  Spring (1 pcs) Fits:Robo R2Robo C2

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Replacement BuildTak FlexPlate for Robo R2 Flexplate System Includes: FlexPlate (1 pcs) Size 9x9in Fits: Robo R2 Please Note: This is not the Complete Builtak FlexPlate System. This is an individual replacement...

Robo R2/C2 Bushing Block  Also known as the carriage bracket Includes: Bushing block (1 pcs) Fits:Robo R2Robo C2  Use with R2/C2 Bushings Note: Once installed, it is not possible to remove the bushing blocks without damaging them. 

Cable - IR Sensor to Downtown Board For connecting IR Bed Level Sensor to Downtown Board  Includes: Cable (1 pcs) Fits: Robo R2Robo C2

Extruder Motor Cable for Robo R2 and C2 3D Printers Includes: Cable (1 pcs) Fits: R2C2

Z Motor Cable This cable is for the R2, but also works for the C2 and R1/+ Includes: Cable (1 pcs) Length: 600mm Fits: R2C2R1/+

X Endstop (limit switch) Cable Includes: Cable (1 pcs) Fits: R2

X Stepper Motor Cable for Robo 3D Printers This cable is for the R2 X motor but also fits the Robo C2 and R1/+ Includes: Cable (1 pcs) Length: 700mm Fits: R2C2R1R1+

Y Endstop (limit switch) Cable Includes: Cable (1 pcs) Fits: R2

Z Endstop (limit switch) Cable Includes: Cable (1 pcs) Fits: R2

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

Doorstop for Robo R2 Includes: Door stop (1 pcs)Magnets  (2 pcs) Fits: Robo R2

Replacement Downtown Board for Robo R2 and C2 3D printers Includes:Downtown board (1 pcs)Screws (3 pcs) Fits:Robo R2Robo C2 Additional mounting screws sold here

Downtown Board Screw Set For mounting the Downtown board. Includes: Screws (3 pcs)  Fits:Robo R2Robo C2

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extruder Assembly for Robo R2/C2 NOTE: Does not include the hotend assembly. If needed, purchase the correct hotend assembly below: R2 Hotend Assembly C2 Hotend Assembly  Fits: This is a C2 extruder assembly, but it will also fit the R2 (the...

Extruder Carriage Bearing Block These bearing blocks are removed from brand new C2 extruder assemblies. They are new, but may show some signs of being disassembled. These come with the stock OEM bearings. We have high precision upgraded bearings...

LM6LUU Linear Bearings Precision linear bearings. Includes: Linear Bearings (4 pcs) Specifications:ID: 6mmOD: 12mmL: 35mm Fits:Robo R2Robo C2    

Robo Extruder Latch Spring  Includes: Spring (1 pcs) Fits: Robo R2Robo C2

Mount for Extruder Stepper Motor and Uptown Board Includes: Motor mount (1 pcs) Fits:Robo R2Robo C2

Robo 3D Extruder Top Cover Includes: Top cover (1 pcs) Fits:Robo R2Robo C2

Robo Extruder Wiring Harness  Runs from mainboard to extruder Includes: Wiring harness (1 pcs) Fits: R2

Robo Electronics Cooling Fan  Includes: Fan (1 pcs) Fits:Robo R2Robo C2 

Robo Print Cooling Fan Includes: Fan (1 pcs) Fits: Robo R2Robo C2

Heat Sink Fan Includes: Fan (1 pcs) Fits: Robo R2Robo C2   

Fan Shroud for Robo R2 and C2 Includes magnets for mounting metal Robo plate on front. Does not include printed fan ducts that attach to the bottom. You can download the stl files for those here Includes: Fan shroud (1 pcs) Fits: Robo R2Robo C2

Ferrite Core Anti-Interference Ring Includes: Ferrite ring (1 pcs) Fits wire up to 4mm

Robo Filament Sensor Block (cover) Includes: Sensor block (1 pcs) Fits:Robo R2Robo C2 Note: This is the replacement filament sensor block only.

Adjustable Filament Tension Lever (extruder latch) Since the original Robo filament tension lever is no longer available, Jonah created this adjustable one. This tension lever allows for easy adjustment of tension using a 2.5mm hex key. MJF Printed in...

Flange Bearing Includes: Bearing (2 pcs) Specifications:ID: 8mmOD: 12mmW: 3.5mmF: 13.6mm Fits:Robo R2Robo C2

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

PB Select™ GT2 Pulley - 2 Pack Includes:Pulley (2 pcs) Set Screws (4 pcs) Fits: 8mm Linear Rods Specs:20 Tooth7mm Wide (for 6mm belt)8mm Bore  

PB Select™ GT2 Drive Pulley  Recommended for use with Gates GT2/3 belts Includes:Pulley (1 pcs)Set screw (2 pcs) Fits: 8mm Shaft Specs:20 Tooth7mm Wide (for 6mm belt)8mm Bore

HDMI Cable Board-to-LCD connection cable Includes: Cable (1 pcs)  Fits: Robo R2Robo C2    

Replacement Molex™ Connector Plug for Robo R2 V.2 Heated Bed This is a replacement plug for your R2 v.2 heated bed  Includes:1 Molex Connector8 Molex Crimp Connector Sockets - Gold 22-24AWG You can use needle nose pliers to...

R2 Heater Cartridge 24V heater cartridge (also called a heater core). Includes: Heater cartridge (1 pcs) Fits: Robo R2

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Hobbed Filament Drive Gear Includes: Gear (1 pcs) Fits: R2C2

Robo R2 and C2 Hotend Clamping Screw 12.9 grade M3 socket head cap screws used to secure the hotend to the aluminum mounting plate. Use caution when installing your hotend, over-tightening will cause stripping of the threads in the aluminum mounting...

Robo Hotend Mounting Plate for R2 and C2 This is the aluminum plate that holds the hotend Comes with an upgraded (12.9 grade) M3 socket head cap screw used to secure the hotend to the aluminum mounting plate. Use caution when installing,...

Cover for IR Bed Leveling Sensor Includes: Cover (1 pcs) Fits:Robo R2Robo C2

Robo R2/C2 Ribbon Cable  OEM Board-to-LCD cable with filament sensor cable.  Includes: Cable (1 pcs) Fits:Robo R2Robo C2

Robo R2/C2 Leadscrew Nut Includes: Nut (1 pcs)  Fits:Robo R2Robo C2

Robo 3D X/Z Axis Limit Switch  Includes: Limit switch (1 pcs) Fits: R2 Color of board may be different from picture  

Robo 3D Y Axis Limit Switch  I build these switches here at Partsbuilt 3D using quality JST connectors and genuine Omron or C&K switches. Includes: Limit switch (1 pcs) Fits: R2 Color of board may be different from picture 

Robo Z Axis Linear Bearing Includes: Bearing (1 pcs) Specifications:ID: 12mmOD: 21mmL: 57mmF: 32mm Fits:Robo R2Robo C2     

Robo Brass Bushing - 4 Pack Includes: Bushing (4 pcs) Specifications:ID: 8mmOD: 11.7mmL: 36mm Fits:Robo R2Robo C2

Robo R2 Linear Rod - 6mm for Inner X/Y Axis  Smooth linear rods for the Inner X/Y axis of the Robo R2.  Includes: Rod (1 pcs) G6 high precisionHRC60Hard Chrome PlatedGcr15 steel  Fits: R2

Robo R2 Linear Rod - 8mm for Outer X/Y Axis  Smooth linear rods for the outer X/Y axis of the Robo R2.  Includes: Rod (1 pcs) G6 high precisionHRC60 Hard Chrome PlatedGcr15 steel Fits: R2

Robo R2 Linear Rod - 12mm - Z Axis  Smooth linear rods for Z axis Includes: Rod (1 pcs) G6 high precisionHRC60 Hard Chrome Plated Gcr15 steel   Fits: R2 Z Axis

M2.3x6mm Blunt Nose, Pan Head Screw Set Includes: Screws (2 pcs) Head: PanSize: M2.6Length: 6mmType: Blunt nose

Robo 3D Brass Nozzle Size:  0.40mm  Fits: Robo R1Robo R1+Robo R2Robo C2

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Raspberry Pi Power Cable This is the cable that runs from the mainboard to the Raspberry Pi. It is a little shorter then the stock R2 cable, but will reach with slightly less excess wire. Includes: Cable (1 pcs) Fits:Robo R2Robo C2

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Print Bed Plastic Housing for Robo R2 Includes: Plastic bed housing (1 pcs) Notes: This is the plastic housing only.Does not include screws: Reuse the screws from your old bed. Does not include magnets: Reuse the magnets...

Standoffs for Mounting Raspberry Pi Includes: Standoff (4 pcs) Fits:Robo R2Robo C2

Ribbon Cable - Uptown to Downtown Board  Includes: Cable (1 pcs) Fits:Robo R2Robo C2

  Microswiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers...

Robo R2/C2 Rubber Feet  Includes: Rubber foot (2 pcs)Installation pins (2 pcs) Fits: Robo R2Robo C2

Filament Sensor Block Mounting Plate Includes: Plate (1 pcs) Fits: Robo R2Robo C2

Artillery GT2 Pulley (Steel) Steel timing pulley Includes:Pulley (1 pcs)Set Screws (2 pcs) Fits: 8mm Shaft Specs:20 Tooth7mm Wide (for 6mm belt)8mm BoreSteel

Nema17 Stepper Motor for Robo R2 and C2 3D Printers Includes:Motor (1 pcs)Filament drive gear - installed (1 pcs) Fits: Robo R2Robo C2*Robo R1/+ (X/Y Axis Only) **Notes: This motor will work for the X and Y axis of all the above printers...

Nema17 Stepper Motor For the X/Y and Extruder axis of the R1/+, R2 and C2 3D printers. Includes: Motor (1 pcs) Fits:Robo R2Robo C2Robo R1Robo R1+

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:2 position20 ampSafety approval:  Shade of green may be different than photo

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:4 position15 amp

Robo Thermistor Includes: Thermistor (1 pcs) Fits:Robo R2Robo C2

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

Uptown Board for Robo 3D printers Includes:Uptown board (1 pcs)Screws (2 pcs) Additional mounting screw available here