Sidewinder X2

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs) Please Note: This is the latest version from Artillery and has a slightly...

Aluminum Spacer Includes: Spacer (1 pcs) Size:ID: 5mmOD: 8mmLength: 7mm Fits:Sidewinder X2Genius ProHornet

Artillery Automatic Bed Leveling Assembly (Sensor Switch) Includes: ABL switch (1 pcs) Fits: Sidewinder X2Genius Pro

Artillery Bearing (95ZZ) Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 9mmW: 3mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

MR95ZZ  Bearing for Titan and Titan Aero Extruder Includes: Bearing (2 pcs) Specifications:ID: 5mmOD: 9mmW: 3mmMR95ZZABEC 5 Fits: TitanTitan Aero

Silicone Heater for Print Bed Includes: Silicone Heater (1 pcs)300x300x7mm Thermal Insulation (1 pcs) Voltage: 110 Fits: Sidewinder X2

Artillery Insulation for Print Bed Heater Adhesive backed for easy installation Includes: Thermal insulation (1 pcs) Size: 300x300x7mm Fits:Sidewinder X1*Sidewinder X2 *Note: Artillery now uses the X2 insulation pad for both the X1 and X2...

Artillery Closed Loop GT Belt Includes: Belt (1 pcs) Size:Length: 760mmWidth: 6mm Fits:Sidewinder X1Sidewinder X2

Artillery X Axis Timing Belt Includes: Belt (1 pcs) Size:Length: 930mmWidth: 6mm Fits:Sidewinder X1Sidewinder X2

Artillery GT Belt Includes: Y-axis belt (1 pcs) Size:Length: 970mmWidth: 6mm Fits:Sidewinder X1Sidewinder X2  

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Cable for Auto Bed Leveling Sensor (ABL) Includes: Cable (1 pcs) Fits:Sidewinder X2Genius Pro

Cable for Extruder Motor Short cable (wire harness) that runs from the extruder motor to the extruder PCB board. Includes: Cable (1 pcs) Fits:Sidewinder X2Genius Pro

Artillery Cable for Filament Sensor Includes: Cable (1 pcs) Length: 900mm  Fits: Sidewinder X1Sidewinder X2

420mm Cable for TFT Touch Screen Fits: Sidewinder X2 Includes: Cable (1 pcs)

Cable for X Motor Length end-to-end is approximately 75mm Includes: Cable (1 pcs) Fits: Sidewinder X1Sidewinder X2Genius Pro

Cable for Y Stepper Motor Includes: Cable (1 pcs) Fits: Sidewinder X2

395mm Cable for Z Axis Limit Switch Fits: Sidewinder X2  Includes: Cable (1 pcs)

Cable for Z Stepper Motor Includes: Cable (1 pcs) Fits: Sidewinder X2Sidewinder X3 Plus

CopperBlock™ Hot Block This Volcano style heater block is compatible with E3D thermistor cartridges and high temperature, high accuracy PT100 temperature sensors. Includes:  Heater block (1 pcs)Set screw (1 pcs)Clamping screw (2...

CopperTop™ Heat Break for Artillery - All metal design for higher temperature printing. - Copper cold side (top) for better heat dissipation to the heatsink- Titanium throat has low thermal conductivity to reduce heat creep...

Artillery Dowel Pin (Cylindrical Shaft) Includes: 3x8mm Pin (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

Eccentric Nut for X Axis Carriage Includes: Eccentric nut (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extruder Assembly with All Metal Hotend This Extruder assembly has an all metal hotend for printing higher temperature. Complete extruder/hotend assembly including heater, thermistor and fan. However it does not include any of the wires that connect...

Standard Extruder Assembly  Complete extruder/hotend assembly including heater, thermistor and fan. However, it does not include any of the wires that connect to the mainboard.  Includes: Extruder assembly (1...

Extruder FFC Cable Runs from X axis PCB adapter board to extruder PCB adapter board.  Includes: Cable (1 pcs)   Length: 500mmPins: 24 Fits: Sidewinder X2Sidewinder X3 Plus

Extruder Mounting Bracket (Plate) Includes: Bracket (1 pcs) Color: Blue Fits: Genius ProSidewinder X2

  Extruder PCB Board (Adapter Plate) Includes: PCB board (1 pcs) Fits:Sidewinder X2 Genius Pro

Artillery Extruder Spring Includes: Spring (1 pcs) Length: 12.5mm Fits:Sidewinder X1Sidewinder X2Genius Genius Pro

Artillery CNC Machined Aluminum Extruder Lever Includes: Aluminum lever (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

Artillery Extruder Filament Tension Lever  Includes: Tension Lever (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet Note: This is a polymer (plastic) lever, click here for the metal version of this lever.

Artillery 8020 Axial Fan Includes: Fan (1 pcs) Specs:Voltage: 24 VDCWire Length: 200mmSize: 80x80x20mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery 4020 Blower Fan (Turbo Fan) This is the "Print Cooling Fan" it cools the part being printed Includes: Fan (1 pcs) Specs:Voltage: 24VDCWire Length: 50mmSize: 40x40x20mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery 4010 Axial Fan Includes: Fan (1 pcs) Specs:Voltage: 24VDCWire Length: 75mmSize: 40x40x10mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery 80mm Fan Guard Includes: Fan Guard (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro80mm fans

Artillery FFP Cable - TFT Touch Screen to USB Port This cable runs for the touch screen assembly to the USB/Micro SD adapter. Includes: Cable (1 pcs) Fits: GeniusGenius ProSidewinder X1Sidewinder X2

Artillery Extruder Guide Tube (ABS) Includes: Guide tube (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius ProHornet

Artillery Filament Runout Sensor (Photoelectric Switch) Includes: Sensor switch (1 pcs) Fits: Sidewinder X2Genius Pro

Artillery Filament Runout Sensor Includes: Filament sensor (1 pc)Ball joint (1 pc) Fits:Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Rod End Ball Joint Mounts filament sensor Includes: Ball joint (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Flange Bearing (685ZZ) Includes: Bearing (1 pcs) Specifications:ID: 5mmOD: 11mmW: 5mmF: 12.5mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Flange Bearing (688ZZ) Includes: Flange bearing (1 pcs) Specifications:ID: 8mmOD: 16mmW: 5mmF: 18mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Flexible Magnetic Build Plate Kit Flexible steel print surface is held in place by included sheet magnet. Surface is powder-coated, textured PEI. The textured surface gives the bottom of your prints a nice textured look and...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Artillery Glass Build Plate (Print Bed) Includes:Carborundum glass bed (1 pcs)Mounting bolts - preinstalled (4 pcs) Fits:Sidewinder X1Sidewinder X2  WARNING  Allow the bed to cool completely before attempting to remove a print...

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

Artillery Heat Break  Includes: Heat break (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Aluminum Heater Block Includes: Heater block (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Heater Cartridge (Heating Tube) Heats the hotend Includes: Heater cartridge (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Hotend Heatsink Includes: Heatsink (1 pcs)Set screw (2 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius Pro Note: Mounting hardware not included

PB Select™ High Flow Brass Nozzle (Volcano Compatible) Includes: Nozzle (1 pcs)Orifice Size: Select AboveMaterial: BrassFor Filament Size: 1.75mm Size is easily identified by dots on the side of the nozzleDOTS = DIAMETER0...

PB Select™ Plated Copper High Flow Nozzle Includes: Nozzle (1 pcs) Size: Select Above These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal...

Artillery Hotend Assembly Includes: Heater Cartridge (1 pcs)Thermistor (1 pcs)Heater Block (1 pcs)Heat Break (1 pcs)Nozzle (1 pcs)Silicone Sock (1 pcs) Fits:Sidewinder X1 (with smooth heat break)Sidewinder X2GeniusGenius Pro Note: Does not fit...

Artillery Hotend Mounting Block This is the lower housing shell in which the hotend mounts. Includes: Mounting Block (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius ProHornet Note: Mounting hardware is not included

Artillery Idler Pulley  Includes: Pulley (1 pcs) Specs:20 Tooth7mm Wide (for 6mm belt)5mm Bore15mm OD Fits:Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery Idler Shaft Sleeve Includes: Sleeve (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

Artillery Large Gear Assembly for Extruder Includes: POM gear assembly (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius Pro

T8 Lead Screw (Z Axis) Includes: Leadscrew (1 pcs) Fits: Sidewinder X1Sidewinder X2

Brass Lead Screw Nut - Z Axis Includes: Lead screw nut (1 pcs)  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

LGX Accessories For Artillery Sidewinder and Genius Includes:1x LGX PA12 Fan Shroud;1x LGX PA12 Fan Mount1x ALU Mount Plate1x 5015 24V radial fan6x M3x6 Allen screw Low Head1x M3x25 Allen screw Low Head1x M3x10 Allen screw...

Artillery X Axis Endstop Limit Switch Includes: Limit switch (1 pcs) Fits:Sidewinder X1Sidewinder X2GeniusGenius Pro

Y Axis Limit Switch Fits: Sidewinder X2 Includes: Limit Switch (1 pcs)

Artillery Z Axis Endstop Limit Switch Includes: Limit switch (1 pcs) Fits:Sidewinder X1Sidewinder X2GeniusGenius Pro  Fitment Note 1) The plug may be different on some older models. Please verify that the plug in the picture...

M2™ Hardened High Speed Steel - Volcano Compatible Nozzle The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to...

Ruby 32bit Mainboard Also called the control board or motherboard. Includes: Mainboard (1 pcs) Fits: Sidewinder X2 Comes with X2 firmware installed.

X Pulley Mounting Bracket (Plate) This is the plate for mounting the X pulley.  Includes: Bracket (1 pcs) Fits: Sidewinder X2Genius Pro

Brass Nozzle Includes: Nozzle (1 pcs)  Size: (Select Above) Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Push Pin for Artillery Automatic Bed Leveling Assembly (Sensor Switch) This is the small plastic pin the protrudes from the bottom of the ABL Includes: Pin (1 pcs) Fits ABL on: Sidewinder X2Genius Pro

Artillery Pinion Gear (POM) Includes: POM Gear (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius ProHornet

Power Supply (PSU) Includes: Power Supply (1 pcs) Specs:Input Voltage: 100-240Output Voltage: 24VDCAmps: 8.5 Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Artillery PTFE Tube This is the PTFE tube that installed between the extruder and hotend.  Note: This is a general length tube and will need to be cut to size for your specific printer. We recommend this cutter for a straight clean cut...

SSR Relay Assembly Includes: Relay assembly (1 pcs)  IMPORTANT  This relay is switchable, be sure it is set to the voltage of your outlet before using.  Fits:Sidewinder X2 Genius Pro

Artillery Roller Wheel (Also Called a POM Wheel) Used on the X axis carriage Includes: Wheel with Bearings (1 pcs) Fits: Sidewinder X1Sidewinder X2Sidewinder X3 ProGeniusGenius Pro

PB Select™ Silicone Sock for Artillery The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

PB Select™ Silicone Sock for Artillery The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

Artillery Silicone Sock for Heater Block Includes: Silicone Sock (1 pcs) Fits: Sidewinder X1Sidewinder X2Genius Genius Pro

Small Spool Roller for Artillery Sidewinder X2 This file was designed by James I. Click here to read more about the spool holder and to download the STL file.   Licensed under a Creative Commons Attribution-ShareAlike 4.0 International...

Artillery Yellow Bed Springs Includes: Spring (4 pcs) Length: 25mm Fits:Sidewinder X1Sidewinder X2Genius Genius Pro

BP Select™ Stainless Steel Pinion Gear for E3D Titan Extruder Includes:Pinion Gear (1 PCS)Set Screw (1 PCS) Fits:E3D TitanArtillery Sidewinder X1Artillery Sidewinder X2Artillery GeniusArtillery Genius ProOther printers that use the titan style...

Artillery GT2 Pulley (Steel) Steel timing pulley Includes:Pulley (1 pcs)Set Screws (2 pcs) Fits: 8mm Shaft Specs:20 Tooth7mm Wide (for 6mm belt)8mm BoreSteel

Stepper Driver Includes: Stepper driver (1 pcs) Fits:Sidewinder X1Sidewinder X2GeniusGenius ProHornet

NEMA 17 Stepper Motor for Artillery Extruder Has threaded mounts on the back  Includes: Stepper motor (1 pcs) Size: 42x42x24mm Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

Stepper Motor for X or Z Axis (Hornet X/Z/E) Includes: Stepper motor (1 pcs) Size: 42x42x40mm Fits (X/Z Axis): Sidewinder X1Sidewinder X2Genius Genius Pro Fits (X/Z/Extruder):Hornet

Y Axis Stepper Motor Includes: Stepper motor (1 pcs) Size: 42x42x48mm Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

TFT Touch Screen Assembly Includes: Touch screen (1 pcs)TFT control board (1 pcs)Ribbon cable (1 pcs)Micro SD reader/USB board (1 pcs) Fits: Sidewinder X2

Hotend Thermistor (Temperature Sensor) Includes: Thermistor (1 pcs) Fits: Sidewinder X1Sidewinder X2GeniusGenius Pro

PB Select™ 100K 3950 Thermistor (Temperature Sensor)  IMPORTANT NOTE This thermistor will not fit the standard Artillery heater block. It is meant to be used if you upgrade to a copper heater block like this...

Artillery Bed Leveling Nut Includes: Thumbnut (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius Pro

Artillery Thumbscrew (POM) Includes: Thumbscrew (1 pcs) Fits:Sidewinder X1Sidewinder X2Genius Genius ProHornet

Thumbscrew for E3D Titan Extruder Includes: Thumbscrew (1 pcs) Fits: E3D Titan Extruder Artillery GeniusArtillery Genius ProArtillery SW X1Artillery SW X2  

PB Select™ Titanium Heat Break for Kraken, Chimera and Artillery - 1.75mm Titanium heat break for the Kraken & Chimera. *May also be used to convert some Artillery printers to an all metal hotend.  Includes: Heat break (1...

Artillery U-Bearing Used on the filament tension lever Includes: Bearing (1 pcs) Specifications:Type: U BearingID: 3mmOD: 10mmW: 4mm  Fits: Sidewinder X1Sidewinder X2GeniusGenius ProHornet

Artillery USB Drive Includes the software that comes preloaded on the factory USB drives for the bellow listed printers. Includes: USB drive (1 pcs) Color: Blue Fits:GeniusGenius ProSidewinder X1Sidewinder X2