Description

Double-sided Powder-coated PP Spring Steel Sheet

Includes: Spring steel sheet (1 pcs)

This print sheet is specially designed to print polypropylene-based filaments, especially the Prusament PP Carbon Fiber Black. The PP-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PP (Polypropylene).
The PP sheet has a lightly textured surface finish similar to the Satin Powder-coated Steel Sheet.
You can learn more about the PP sheet in this online help article.

ATTRIBUTES
+ Perfect for most PP materials
+ No need for any separation layer
+ Can be cleaned with IPA
+ Supports printing large PP parts

- Suitable only for PP-based materials. Other materials tend to detach mid-print
- Can be damaged with acetone

WARNING
Never clean the PP sheet with acetone! Acetone partially dissolves the sheet‘s surface, leaving stains. It may also negatively affect both adhesion properties and the sheet’s lifespan. Learn more about printing on the PP sheet in this online help article.

Fits:
Prusa CORE One
Prusa MK2.5
Prusa MK2.5S
Prusa MK3
Prusa MK3S
Prusa MK3S+
Prusa MK3.9
Prusa MK3.9S
Prusa MK4
Prusa MK4S

Prusa warranty notes:
Consumable parts, such as PEI sheets (smooth, textured, PP, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.
After removing the 3D-printed object, you may notice a visible imprint on the sheet’s surface. This is only a visual change: it doesn’t leave any marks on the next 3D-printed parts and does not affect the printing properties in any way. Therefore it’s not considered a reason for a warranty claim.
As a result of the temperatures to which the sheet is exposed during printing, some parts of heatbed texture may be imprinted into the sheet’s bottom side and make some parts slightly glossier. This visual change does not adversely affect the printing properties and is also not considered a reason for a warranty claim.

Example of imprint