Volcano

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

E3D Collet Clip Only fits this collet for 4 mm PTFE Tube. Includes: Collet clip (2 pcs) FitsE3D V6E3D Revo SixE3D Revo MiniE3D CRPrusa Bondtech

CopperBlock™ Hot Block This Volcano style heater block is compatible with E3D thermistor cartridges and high temperature, high accuracy PT100 temperature sensors. Includes:  Heater block (1 pcs)Set screw (1 pcs)Clamping screw (2...

  E3D Thermistor Cartridge  Cartridge type Semitec 104NT thermistor suitable for all E3D (and other) hotends using a cartridge type heater block. Includes: Thermistor (1 pcs) Specs:Max temperature: 300°CCartridge diameter:...

E3D Hotend Fan - Ball Bearing - 30mm 24v These fans have the E3D seal of approval. Use for E3D HotEnds, Extruders or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs) Size: 30x30x10mmVoltage: 24 VDCLeads: 1mConnector: 2...

E3D Prusa Specific Titanium Heat Break Similar to the heat break that comes stock on many Original Prusa 3D printers, but these are titanium for lower thermal transfer. Includes: Prusa specific titanium heat break (1 pcs) Fits:MK2MK2SMK2...

E3D Prusa Specific Heat Break Depending on availability we get these from E3D or Prusa ResearchThis is the heat break that comes stock on many Original Prusa 3D printers. Includes: Prusa specific heat break (1 pcs) Fits:MK2MK2SMK2.5MK2...

High Precision E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. The high precision heater...

E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. Includes: Heater (1...

High Precision E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. The high precision heater...

E3D Heater Cartridge Purpose-made 40W heater cartridge for E3D HotEnds. These aren’t the same as the low-quality parts often seen in clones and have a considerably higher internal build quality. Includes: Heater (1...

  E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+

PB Select™ High Flow Brass Nozzle (Volcano Compatible) Includes: Nozzle (1 pcs)Orifice Size: Select AboveMaterial: BrassFor Filament Size: 1.75mm Size is easily identified by dots on the side of the nozzleDOTS = DIAMETER0...

PB Select™ Plated Copper High Flow Nozzle Includes: Nozzle (1 pcs) Size: Select Above These high precision copper nozzles are great for printing everything from PLA to PEEK. they have a much higher thermal...

M2™ Hardened High Speed Steel - Volcano Compatible Nozzle The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

E3D Silicone Sock for Volcano Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...