Bambu Lab

Bambu Lab Lubricant Grease Lubricant Grease is used to lubricate lead screws, or to eliminate noise issues between belts and idle pulleys.  Includes: - Lubricant Grease (6 pcs) Learn more about the Lubricant Grease...

Bambu Lab Lubricant Oil Lubricant Oil is typically used for the lubrication of linear guides, slide rails, and steel shafts. Theoretically, Lubricant Oil can also be used for lead screw lubrication, but since Lubricant Oil is prone to...

Machine Controller Board for Bambu Lab X1 Series Printers The machine control board is the control center for the XYZ-axis motors, the cooling fans, the heat bed, and the AMS. Includes: MC board (1 pcs) Fits: Bambu Lab X1...

  Bambu Lab MC to AP Board Cable Set for the H2D and H2D Laser The MC AP board cable Set contains the cables needed to connect the MC board to the AP board on the Bambu Lab H2d and H2D laser. Includes: Communication Cable (1 pcs)Power...

  Bambu Lab MC to AP Board Cable for P1 Series Printers Cable that connects the MC board to the AP board on the P1 series printers. It supplies power and data. Includes: Cable (1 pcs) Fits: Bambu Lab P1...

  Bambu Lab MC to AP Board Cable for X1 Series Printers The 2 cables that connect the AP board and MC board of the X series printers, supplying the power from MC to AP, and data interaction between them. Includes: AP board to MC...

Bambu Micro Lidar (Dual Red Laser) for X1 Series The Bambu Micro Lidar is a sensor capable of measuring depth in micrometers. Using this unit, the system can measure the distance, calibrate the flow extruded from the nozzle, and scan the first layer...

Bambu Lab Micro Lidar Cover for X1 Series Printers The Bambu Micro Lidar shell consists of three segments, a top cover, a bottom cover, and a protective lens (protective lens not included). Includes: Micro Lidar Top Cover (1 pcs)Micro Lidar...

Bambu Lab Motor Drive Pulley for X1 and P1 Series Printers The motor drive pulley is installed on a motor to drive the belt. Includes: Drive pulley (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 Series Instillation: Learn...

Noga Teddy Burr - TB1000 Deburring tool (3D Print Cleanup Tool) The TB1000 is a high quality deburring tool with 8 mm painted hexagonal aluminum handle and N1 blade. Great for post production of 3D prints. Blade is replaceable. The Teddy Burrs has...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Bambu Lab Nozzle Eddy Sensor (Left) for the H2D & H2C Printers The Nozzle Eddy Sensor is used to detect whether the nozzle is wrapped by molten filament. Includes:Nozzle Eddy Sensor (1 pcs)BT2-6 Screw (1 pcs) Fits: Bambu Lab...

Bambu Lab Nozzle Eddy Sensor (Right) for the H2D printer The Nozzle Eddy Sensor is used to detect whether the nozzle is wrapped by molten filament. Includes:Nozzle Eddy Sensor - Right (1 pcs)BT2-5 Screw (2 pcs)M2-5 Screw (2...

Nozzle Wiper - 3 Pack The Nozzle Wiper is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw. Includes: Nozzle wiper (3 pcs)Mounting screw (3...

Part Cooling Fan for Bambu Lab A1 Series PrintersThe Part Cooling Fan is used to ensure adequate cooling of the printed layers during the printing process. It helps in rapidly cooling the material as it is extruded, allowing each layer to...

Bambu Lab Part Cooling Fan for the H2D The Part Cooling Fan, located at the toolhead's base, works in tandem with the Air Duct to swiftly cool extruded filament. Includes: Part Cooling Fan (1 pcs)BT2.6-8 Screw (2 pcs)BT3-20...

Bambu Lab Part Cooling Fan for The H2D The part cooling fan, located at the toolhead's base, works in tandem with the air duct to swiftly cool extruded filament. Includes: Part Cooling Fan (1 PCS)BT2-6.5 Screw (1 PCS)BT2-5...

Bambu Lab AMS 2 Pro Power Board The AMS 2 Pro power board is a circuit board installed at the rear of the AMS 2 Pro. It is responsible for receiving DC power from the printer and transmitting it to the AMS 2 Pro mainboard. Additionally, it...

  Bambu Lab 4-in-1 Printer Cable Pack  The pack comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable...

Translucent PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: Translucent...