Creality

Sock-X for E3D Revo Nozzles Nozzles not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle. These...

PB select™ Silicone Sock Includes: Silicone sock (1 pcs) Color: Black Fits:Creality K1Creality K1CCreality K1 Max

SLS 12mm EZABL Mount For DDX Mount a 12mm EZABL bed leveling sensor onto the DDX Made of PA12 (Nylon) with the SLS 3D printing process Better surface finishing and higher working temperature resistance With square nut pockets for increased...

SLS 18mm EZABL Mount For DDX Mount a 18mm EZABL bed leveling sensor onto the DDX Made of PA12 (Nylon) with the SLS 3D printing process Better surface finishing and higher working temperature resistance With square nut pockets for increased...

Creality 42-34 Stepper Motor (Y Axis) Includes:Stepper motor (1 pcs)Drive pulley - installed (1 pcs) Fits: Ender 2 ProEnder-3 V2|Ender-3 NeoEnder 3 V2 NeoEnder-3 ProEnder-3SEnder-3 S1Ender-3 S1 ProSermoon V1 Pro

Creality 42-40 Stepper Motor Includes: 42-40 Stepper Motor (1 pcs) Below are some of the printers this motor will fit. It may also fit other Creality printers that use the 42-40 stepper motor pictured above Fits: X Axis  CR-10 Max CR-10S Pro V2...

Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality grease...

Super Lube® 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease. Includes: 1...

Tension hardware kit for Direct Drive Extruder This is a spare tension hardware kit for Microswiss Direct Drive kit for CR-10 / Ender printers.  Includes:Tension Pin (1 pcs)Spring (1 pcs)Tension Knob (1 pcs) Fits: Microswiss...

Creality Hotend Thermistor Includes: Hotend Thermistor (1 pcs) Fits: Ender 3 Ender 3S Ender 3 Pro

Timing Belt Clamp (Brass) 10 pack Use needle nose pliers to crimp these clamps on the end of a 6mm timing belt. These clamps are used on Creality, Artillery, Sovol, Elegoo and many other 3D printers.  Includes: Brass clamp (10 pce)

Thermal Heat Break for Microswiss All Metal Hotend Kit Replacement heat break for Microswiss All Metal Hotend Kit Made from Grade 5 Titanium Includes: Heat break (1 pcs) FitsMicroswiss hotend for CR-10 / Ender KitMicroswiss hotend...

Bondtech SLS Universal BLTouch Mount For DDX V3 Mount a BLTouch bed leveling sensor onto the DDX V3 (Bltouch and DDX extruder not included) Made with PA12 (Nylon), which allows for higher working temperatures than FDM counterpart Universal...

E3D Volcano Brass Nozzle Orifice Size: Select Above  Type: BrassFilament Size: 1.75mm Volcano nozzles are super fast printing nozzles for use with the Volcano block and print large layer heights at extremely high flow rates...

X-TIP™ Nozzle (Nickel Plated, Copper Alloy with Hardened Steel Tip) Includes: Nozzle of selected size (1 pcs)OrTriple pack (3 pcs) - one each of 0.40mm, 0.60mm, 0.80mm  The X-Tip is a nickel plated, copper alloy nozzle with a hardened...

Capricorn Low Friction XS Series Bowden Tubing  Includes: XS series tubing (1 pcs) Fits: 1.75mm diameter filament Length: 1 meter The XS series is Capricorn's flagship PTFE Bowden tubing and is considered the best in the...

  Creality Yellow Bed Leveling Spring Strong bed springs for Creality and other 3D printers. Fits most Creality printers that use bed springs.  Includes: Spring (1 pcs) Dimensions:Length: 30mm (un-sprung)OD: 8.2mmID:...

Coupler - Stepper Motor to Leadscrew Includes: Coupler (1 pcs) Size:Motor Shaft: 5mmLeadscrew: 8mm Fits:CrealityArtillery

Creality 42-34 (Z) Stepper Motor Includes: Stepper motor (1 pcs) Location: Z Axis Fits:Ender-2 ProEnder-3 S1Ender-3 S2 ProEnder-3 S1 PlusEnder-3Ender-3 NeoEnder-3 V2Ender-3 V2 NeoEnder-3 MaxEnder-3 Max NeoEnder-5 ProEnder-5 PlusCR-6 SECR-6...

Aluminum Alloy Coupling - 2 Pack Anodized aluminum coupling for joining 5mm motor shaft with 8mm leadscrew. Specs: 5mm ID -side A 8mm ID - side B 13.8mm OD 25mm length Includes: Coupling (2pcs) Setscrew (2 pcs) Fits:  Ender-3...