Dreamer NX

  Flashforge Power Inlet Includes:Power inlet with switch (1 pcs)8 amp fuse (1 pcs) Fits:InventorDreamerDreamer NX

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Power Inlet Includes:Power inlet with switch (1 pcs)8 amp fuse (1 pcs) Fits:InventorDreamerDreamer NX

  Flashforge Replacement Power Supply Includes: Power supply unit (1 pcs)  Fits:Creator ProCreator Pro 2Creator Max Creator Max 2DreamerDreamer NXInventor

  Flashforge Print Surface Bed Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 153x232mm (can be cut to fit other printers) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Inventor (for Inventor 2 bed tape...

  Flashforge Extruder/Nozzle PTFE Tube This is the PTFE tube that fits inside the nozzle/heat break. Includes: PTFE tube (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge Bracket and Idler Pulley Set These brackets hold the outer linear rods and pulleys in place. Pulleys are included as shown in the pictures.  Includes: Front Right side bracket/pulley assembly (1 pcs)Front Left side...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2...

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Side Vent Panel Includes: Vent Panel (1 pcs) Color: White Fits:DreamerDreamer NXInventor

  Flashforge Side Vent Panel Includes: Vent Panel (1 pcs) Color: White Fits:DreamerDreamer NXInventor

Flashforge Extruder Fan Spacers These are the spacers that reside between the extruder fan and heatsink on some Flashforge 3D Printers. Includes: Spacer (4 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits: DreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits: DreamerDreamer NXInventor

  Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printer

  Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2

  Flashforge Extruder Stepper Motor Includes: Stepper motor (1 pcs) Fits:InventorDreamerDreamer NXCreator Pro 2Creator Max 2

  Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X or Y axis Fits:Creator ProCreator Pro 2 Creator MaxCreator Max 2 DreamerDreamer NXInventor

  Flashforge Z Motor Includes:Z Motor with lead screw (1 pcs)Lead screw nut (1 pcs) Fits:DreamerDreamer NXInventorInventor 2Inventor 2S

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Dreamer Z Motor Includes:Z Motor with lead screw (1 pcs) Fits:DreamerDreamer NXInventor

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Touch Screen Includes: Touch Screen (1 pcs) Fits:DreamerDreamer NXNote: Does not come with the metal frame...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  Flashforge WIFI Board Includes: WIFI board (1 pcs) Fits:Creator MaxInventorDreamerDreamer NX

  Flashforge Wrench  For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here. 

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

  Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...

Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings. The motor, limit switch and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings...

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings...

   Used Item  Removed from low hour 3D printer Y Pulley and Bracket Assembly Includes: Brackets (2 Pcs)Pullies (2 Pcs)Linear rod (1 Pcs) Location:Left RearRight Rear Fits:DreamerDreamer NX  

   Like New  - Removed from new or lightly used printers.  Z Bracket Set These brackets are located at the top and bottom of the z axis and hold the linear rods and leadscrew in place.  Includes: Top bracket (1...

   Used Item  Removed from low hour 3D printer.  Flashforge Z Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor