MK2S

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...

  BuildTak PEI Sheet Includes: PEI sheet (1 pcs) Size: 228x254mm (9x10 inches)  An ideal print surface for the Original Prusa i3 MK2 and other 9x10 print beds. Manufactured in the USA to ensure consistent quality,...

BuildTak PEI Sheet Includes: PEI sheet (2 pcs) Size: 228x254mm (9x10 inches)  An ideal print surface for the Original Prusa i3 MK2 and other 9x10 print beds. Manufactured in the USA to ensure consistent quality, the BuildTak...

PEI Print Surface - 260x242mm Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI surface. These can slightly...

PINDA Probe V1 ONLY compatible with the MK2 and MK2S. It is NOT compatible with MK2.5/S and MK3/S/+. Includes: PINDA probe V1 (1 pcs) Fits:MK2MK2S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Power Supply Unit (PSU) for Prusa MK2 Series -  12V 240W  This 12 volt power supply unit is the same brand/model as the original power supply that is on the Prusa MK2/2.5 series printers. Includes: Power supply unit (1 pcs)...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

Prusa Hotend PTFE Tube Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 50 (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK2MK2SMK2.5MK3MMU2 Note: Not compatible with the MK2.5S, MK3S, MK3S+ or MMU2S...

E3D 4mm Push Fit Collet (Collar) High quality replacement push fit collet with metal teeth. These are the small collets that fit E3D V6 and Prusa heatsinks. Includes: Collet (1 pcs)  Size:ID: 4mmOD: 5mm Fits: Bondtech ExtrudersE3D V6...

RAMBo Mini Mainboard Please read our returns policy regarding electronic items This RAMBo Mini is made by Ultimachine in the USA and comes with the selected firmware pre-installed. This is a direct replacement for the stock mainboard. UltiMachine is...

PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6Prusa i3RepRap

Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo High Flow or High Flow X Hotside Pack - 24 Volt, 60 Watt  Note:  These hotsides come with an integrated E3D 104NT thermistor. Make sure this is the correct thermistor for your printer before ordering. This is not a...