MK3S+

Revo™ Silicone Sock Pack Includes:Yellow (2 pcs)Red (2 pcs)Blue (2 pcs)Green (2pcs)HeaterCore socks (2pcs) Fits: E3D Revo Nozzles and HeaterCore

Revo™ Spring Triple Pack Includes: Revo spring (3 pcs) These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

Prusa MMU2S-Einsy/Rambo signal cable Replacement MMU2S-Einsy/Rambo signal cable Includes: Cable (1 pcs) Fits the following printers with MMU2S:MK2.5SMK3MK3S To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...

PB Select™ V6 Silicone Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament...

PB Select™ V6 Silicone Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament...

Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...

Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...

Sock-X  Heater block and nozzle not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for E3D V6 style hotends.  The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X  Heater block and nozzle not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for E3D V6 style hotends. The primary purpose of a silicone sock is to help keep your hotend at a more...

Sock-X for E3D Revo Nozzles Nozzles not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle. These...

PB Select™ Smooth Linear Rod - X Axis Includes: Linear rod (1 pc) Specifications:Length: 370 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: X axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+Prusa MK3.9Prusa MK3...

PB Select™ Smooth Linear Rod - Y Axis Includes: Linear rod (1 pc) Specifications:Length: 330 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Y axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+Prusa MK3.9Prusa MK3...

PB Select™ Smooth Linear Rod - Z Axis Includes: Linear rod (1 pc) Specifications:Length: 320 mmDiameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: Z axis Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+

PB Select™ Smooth Linear Rod Bundle Includes: 370mm rod (2 pcs)330mm rod (2 pcs)320mm rod (2 pcs) Specifications:Diameter: 8mmG6 high precisionGcr15 steelHRC62 chrome plated Location: 370mm = X axis 330mm = Y axis320mm = Z...

Spare Parts Bundle (MK3S+) A convenient set of spare parts and extra fasteners for maintenance and easy repairs of the Original Prusa i3 printer. Includes:Linear MISUMI bearing LMU8 (10 pcs)SuperPINDA (1 pcs)IR filament...

Prusa Spool Holder Includes: Spool holder (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MK4

Double-sided Powder-coated PA Nylon Spring Steel Sheet Includes: Spring steel sheet (1 pcs) This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type...

Double-sided Satin PEI Powder-coated Spring Steel Sheet for the Original Prusa i3 Series Includes: Satin spring steel sheet (1 pcs) Prusa's satin sheet sits between the smooth and textured variants. Its powder-coated surface with...

Original Prusa Spring Steel Sheet with Smooth Double-sided PEI This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa i3 magnetic heatbeds. Perfect for PLAGreat adhesion with almost all materialsSmooth bottom...

Double-Sided textured PEI powder-coated spring steel sheet Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a...

PB Select™ Bed Spacer for Prusa 3D Printers Stainless steel for less heat transfer away from the bed. Includes: Stainless steel bed spacer (2 pcs) Fits:MK3MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make...

Replacement Heat Break for E3D V6 1.75mm Hotend Includes: Heat Break (1 pcs) Fits:E3D V6 1.75mm HotendPrusa E3D V6 Hotend* (Without MMUS) *Note:This heat break is compatible with Prusa printers that do not have the MMUS upgrade. If you have an...

  Prusa i3 Series Compatible Extruder Motor (from LDO Motors) Comparable to the stock motor, Includes integrated wire with latching connector for Prusa i3 series. Includes: Stepper motor (1 pcs) Location: Extruder Fits:Prusa MK2Prusa MK2SPrusa...

Extruder Stepper Motor (E Axis) This is the replacement stepper motor for the Original Prusa i3 series. Includes: Extruder motor (1 pcs) Note: Not compatible with MINI & MINI+. Specifications:Connector: MOLEX 50-57-9404Rated...

Stepper Motor (X Axis) This is the replacement stepper motor for the Original Prusa i3 series. Includes: X-axis motor (1 pcs) Note: Not compatible with MINI & MINI+. Specifications:Connector: MOLEX 50-57-9404Rated current: DC...

Stepper Motor (Y Axis) This is the replacement stepper motor for the Original Prusa i3 series. Includes: Y-axis motor (1 pcs) Note: Not compatible with MINI & MINI+. Specifications:Connector: MOLEX 50-57-9404Rated current: DC...

  Prusa Compatible Z Axis Stepper Motor (from LDO Motors) For left or right Z axis Includes:LDO stepper motor (1 pcs)POM nut (1 pcs)Cable with Prusa compatible connector (1 pcs) - the cable is long enough to work for either the left or right side...

  Prusa i3 Series Compatible Stepper Motor with QLink (from LDO Motors) These motors have a quick link connection so the wire or motor can be replaced individually. Includes:LDO stepper motor (1 pcs)Detachable cable (1 pcs) Location: Extruder...

  Compatible Motor Set for Prusa i3 Series - from LDO Motors Includes:X stepper motor (1 pcs)Y stepper motor (1 pcs)Z stepper motor with lead screw (2 pcs)POM nuts (2 pcs)Extruder stepper motor (1 pcs) Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2...

SuperPINDA The SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor. Making the first layer calibration and mesh bed leveling...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

  Prusa Specific E3D Thermistor Cartridge Includes: E3D thermistor with 700mm cable & latching plug (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+

Heatbed Thermistor Set Includes:Thermistor - E3D (1 pcs)Kapton tape (1 pcs)Aluminum tape (1 pcs) Specifications:Connector: Molex 5057-9402Cable length: 630 mm Fits:MINIMINI+MK2MK2.5MK2.5SMK3MK3SMK3S+ Note: This is the latest version of the...

PB Select™ Thermistor for Prusa Heated Bed Includes: Bed thermistor (1 pcs) Cable length: 630 mm Fits:MINIMINI+MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+ Note: Does not include the kapton or aluminum tape that is needed for installation -...

Prusa MINI+ Hotend Thermistor  *NOTE:  The MK2/2.5, MK3/S/+ and MINI/+ all use the same type of E3D thermistor.The MINI/+ thermistor has a longer wire (840mm on the MINI vs 750mm on the MK2/3 series). Therefore, this thermistor will...

PB Select™ GT Timing Belt Pulley Includes: Timing pulley T16-2GT (1 pcs)Grub screw (2 pcs) Size: Tooth count: 16Bore: 5mmFor belt width of: 6mm Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MK3...

Prusa Timing Belt Pulley Includes: Timing pulley T16-2GT (1 pcs)Grub screw (2 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SMINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make...

PB Select™ U-Bolt Includes:U-bolt (3 pcs)Nylon lock nuts (6 pcs) Specifications:Thread: M3Length: 26 mmThread length: 7mmDistance between center of both tips: 20 mmInside bend diameter: 16.5mm Fits:MK2SMK2.5MK2.5SMK3MK3SMINI To replace this part,...

PB Select™ U-Bolt Includes:U-bolt (1 pcs)Nylock nuts (2 pcs) Specifications:Thread: M3Length: 26 mmThread length: 7mmDistance between center of both tips: 20 mmInside bend diameter: 16.5mm Fits:MK2SMK2.5MK2.5SMK3MK3SMINI To replace this part,...

E3D V6 ObXidian Nozzle V6 nozzles are designed for use with the E3D V6 heater block. Use small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. Includes: Nozzle of selected size (1...

Prusa Compatible Y Axis Carriage from LDO Motors Includes: Carriage (1 pcs) Fits: Prusa MK3Prusa MK3SPrusa MK3S+ Note: Carriage only, no hardware included.