MK4/S

PE Faston 6.3x0.8 Includes: PE Faston Connector (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa Mk4Prusa MK4SPrusa XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...

PEI Print Surface - 260x242mm - for Prusa and other printers Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI...

PG Assembly Adapter This tool printed from high quality PETG. It ensures that the gearbox is correctly aligned during the assembly or after a service. Includes: PG Assembly Adapter (1 pcs) Details: Version of this replacement: E1Required...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

PB Select™ Clear Polycarbonate Spacer for Prusa Nextruder PG Cover This is a clear spacer for the clear PG cover Includes: Spacer (1 pcs) Fits: Clear PG cover Material: PolycarbonateFor Screw Size: M12ID: 13.0...

Prusa MK4 Power Panic Cable (with 2 wires)  IMPORTANT  Before you buy this replacement cable, make sure your printer already has a power panic cable with two wires. Includes: Power panic cable (1 pcs) Fits: Prusa MK3...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9Prusa MK4Prusa XL  To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9SPrusa MK4S Note: Does not fit MK4 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Note: Please expect the bristles to bend during shipping, storage and usage; this is typical for brass brushes...

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

PSU Cable Quick-release for Original Prusa Enclosure A quick-release connector for the 3D printer PSU cables. This is an ideal solution for everyone who often takes the printer out of the enclosure. This spare part is compatible only with the Original...

PB Select™ PSU-xBuddy Power Cable Includes: xBuddy PSU power cable (1 pcs)  Important:  To connect xBuddy board and the black PSU two cables are required. Each cable comprises two wires. Overall Length: 455mm (including...

3D Print Cleanup Tool - NOGA RB1000 Deburring Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as...

Rubber Pads Includes: Rubber pads 20x10x1mm (6 pcs) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...