Printer Parts

MK10 All Metal Hotend Kit - Microswiss The Microswiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  All metal hotends offer more consistent melt chamber control. During slow extrusion rates...

MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...

MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...

MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

PB Select™ MK2.5 PINDA Reduction Cable Includes: Cable (1 pcs)

MK3.5 Adapter Cable Includes: Adapter adapter (1 pc) Fits: Prusa MK3.5 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

Microswiss MK8 Wear Resistant Brass Nozzle  Size: Select Above Includes: MK8 nozzle (1 pcs) - Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction.- Offers one...

PB Select™ MK8 Brass Nozzle Precision ground brass nozzle gives a smooth consistent print. Size: Select AboveIncludes: MK8 nozzle (1 pcs) Fits:Alfawise U20Alfawise U30Anet A8Anet A8 PlusAnet ET4Anet ET5XBQ Prusa I3 HephestosBQ...

MK8 Heat Break (Thermal Tube) Upgrade Made with TwinClad XT coated stainless steel. This Electroless Nickel composite coating is very low friction and used a lot in injection molding for its release properties. The TwinClad XT coating will help...

MK8 M2™ Hardened High Speed Steel Nozzle  Size: Select Above Includes: Nozzle (1 pcs) The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2...

Original Prusa MMU2S to MMU3 upgrade kit for MK3S+ Notes:- This is an upgrade kit, you must already have the MMU2S- This is a kit - you must assemble it by yourself!- Plastic parts are not included. You need to print them yourself. Kit...

MMU3 Printer Cable for MK3.5/3.9/4 This cable is used to connect the MMU3 unit and the printer. Includes: Cable (1 pcs) Fits: Prusa MK3.5Prusa MK3.9Prusa MK4Prusa MMU3 To replace this parts, please consult the Prusa Assembly Manuals. Make...

  12032 Model Cooling Fan This is the large fan that mounts inside the print chamber and cools parts during high speed printing.  Includes: Fan (1 pcs) Size: 120x120x32mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

  5015 Model Cooling Fan (Blower Fan) This is the small blower fan that mounts inside the extruder cover and cools the model being printed.  Includes: Fan (1 pcs) Size: 50x50x15mm Fits:Adventurer 5MAdventurer 5M ProRobo E4

Molex™ Terminal Block Connector for Prusa Printers Includes: Molex connector - 15 amp (1 pcs)Screws (2 pcs) Used for hotend heater cartridge:MK2/SMK2.5/SMK3/S/+MINI/+) Used for heatbed heater:MK2/SMK2.5/S Used for PSU:MK2/SMK2.5/S To...

Molex Connector Set for MakerGear 3D Printers This connector is used for the MakerGear thermistor and heater cartridge. Each set includes:1x Molex connector receptacle, 2 position, 3mm1x Molex connector plug, 2 position, 3mm2x...

PB Select™ Motor Cable Adapter  Includes: Motor cable adapter (1 pcs) Note: One adapter is required for each motor (1pc for X axis, 1pcs for Y axis, 2pcs for Z axis), you need up to 4 adapters per printer. Fits: Prusa MK3.5 Prusa MK3...

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...