Printer Parts

Bondtech SLS Universal BLTouch Mount For DDX V3 Mount a BLTouch bed leveling sensor onto the DDX V3 (Bltouch and DDX extruder not included) Made with PA12 (Nylon), which allows for higher working temperatures than FDM counterpart Universal...

Uptown Board for Robo 3D printers Includes:Uptown board (1 pcs)Screws (2 pcs) Additional mounting screw available here

  Flashforge USB and Ethernet Connection Board Includes: USB/ethernet board (1 pcs)   Fits:Guider 2Guider 2SRobo E3 Pro

  Flashforge USB Interface PCB Board (USB Port) Includes: USB board (1 pcs)   Fits: Adventurer 4Guider 3 Plus

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  MakerGear V4 Hot End Barrel (Heat Break)  Includes: Heat break (1 pcs) Fits: M2 (with V4 hotend)M3-SEM3-ID Installation Instructions Note: A new nozzle is recommend when installing a new barrel. Once a new nozzle has...

  Heater Block for MakerGear V4 Hotend Includes:Heater Block (1 pcs)Set Screws (2 pcs) Fits:M2 (with V4 hotend)M3-SEM3-ID

  Heater Cartridge for MakerGear V4 Hotend  Includes: Heater (1 pcs) Voltage: 24 VDCFor: V4 hotend onlyRated: Up to 300ºC Fits:M2 (with V4 hotend)M3-SEM3-ID Note: If your hotend is able to heat up, but your temperature readings...

  V4 Hot End Assembly for MakerGear 3D Printers Ships fully-assembled, ready-to-install. Includes: V4 heater cartridge (1 pcs)Heat break (1 pcs)Thermistor (1 pcs)V4 heater block (1 pcs)Rubber-coated fiberglass insulation (1 pcs)Nozzle -...

V4 Hotend Assembly for MakerGear 3D Printers Ships fully-assembled, ready-to-install. Includes: V4 heater cartridge (1 pcs)Heat break (1 pcs)Thermistor (1 pcs)V4 heater block (1 pcs)Rubber-coated fiberglass insulation (1 pcs)Nozzle - Stainless...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

No returns on this itemAs you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances...

  Thermistor for MakerGear Printers This thermistor (temperature sensor) is suitable for both the V3b and the V4 Hot Ends.Each thermistor includes the proper Molex connector and can accurately read temperatures up to 300 °C. Includes:...

PB Select™ V6/Revo Six Hotend Bracket Use this bracket to mount an E3D V6 or Revo Six hotend on the Ender 3. CNC machined aluminum.  Includes: Bracket with bolts (1 pcs) Fits: Ender-3 series

E3D V6 ObXidian Nozzle V6 nozzles are designed for use with the E3D V6 heater block. Use small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger 3D prints. Includes: Nozzle of selected size (1...

  VOC Sensor Assembly Includes: Sensor (1 pcs) Fits: Adventurer 5M ProRobo E4

E3D Volcano Brass Nozzle Orifice Size: Select Above  Type: BrassFilament Size: 1.75mm Volcano nozzles are super fast printing nozzles for use with the Volcano block and print large layer heights at extremely high flow rates...