PRUSA RESEARCH

Prusa Hotend PTFE Tube This is a replacement hotend PTFE tube. Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 42.3 mm (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4...

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage:...

Prusa MINI+ Hotend Thermistor  *NOTE:  The MK2/2.5, MK3/S/+ and MINI/+ all use the same type of E3D thermistor.The MINI/+ thermistor has a longer wire (840mm on the MINI vs 750mm on...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE...

Prusa MINI Hotend Assembly Replacement hotend for the Original Prusa MINI, MINI+. All listed components are already assembled together. Includes:Nozzle (Diameter: 0.4 mm) (1 pcs)Hotend...

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The...

Prusa MINI PTFE Tube - Extruder to Print head  Runs from the extruder to the print head. Includes:Extruder-Print head PTFE tube (1 pcs) Swivel nut (2 pcs)Pressed olive part (2 pcs)...

SuperPINDA The SuperPINDA replaces the P.I.N.D.A. V2 (MK3/S, MK2.5/S) and M.I.N.D.A. (MINI). SuperPINDA is temperature-independent, with higher quality sensor, and doesn't need a thermistor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside...

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the...

  Prusa MINI Hotend PTFE Tube This is the hotend PTFE tube. Includes: PTFE tube (1 pcs) Specifications:Length: 43.4 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ Note: This...

Pre-Extruder PTFE Tube This PTFE tube runs from the extruder to filament spool. Included: PTFE tube (1 pcs) Specifications:Length: 150 mmInner diameter: 2 mmOuter diameter: 4 mm Fits:MINIMINI+ To...

Double-sided textured PEI powder-coated spring steel sheet for the Prusa Mini Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the...

Double-Sided textured PEI powder-coated spring steel sheet Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can...