Description
Revo™ DiamondBack Nozzle
The PCD (polycrystalline diamond) used in every DiamondBack nozzle will significantly extend the overall life of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. Delivers high thermal conductivity, low coefficient of friction, and high fracture toughness.
Includes:
Revo nozzle of selected size (1 pcs)
Silicone sock (1 pcs)
Fits: All E3D Revo hotends
Notes:
- You may need to adjust your Z offset when changing nozzles.
- A 60 watt HeaterCore is recommend for best performance
- You may need to adjust your Z offset when changing nozzles.
- A 60 watt HeaterCore is recommend for best performance
Important
Some filled materials contain particles that are close to, if not larger than, some of the smaller industry standard nozzle sizes, including up to 0.4mm. Attempting to print such materials through these nozzle sizes significantly increases the risk a jam. Please check your filament manufacturer’s datasheet for recommended minimum nozzle orifice diameter to ensure that the nozzle/hotend you choose is suitable for your use case.
Some filled materials contain particles that are close to, if not larger than, some of the smaller industry standard nozzle sizes, including up to 0.4mm. Attempting to print such materials through these nozzle sizes significantly increases the risk a jam. Please check your filament manufacturer’s datasheet for recommended minimum nozzle orifice diameter to ensure that the nozzle/hotend you choose is suitable for your use case.
Additional Information
GPC: |
Nozzles |
PSU: |
E3D |
TBC: |
Nozzles |
Nozzle Size: |
0.40mm |
Nozzle Size: |
0.60mm |
Nozzle Size: |
0.80mm |
Nozzle Size: |
All Sizes |
Brand Name: |
E3D |
E3D Revo: |
Nozzles |
Nozzle Type: |
Brass |
Nozzle Series: |
Revo |
Nozzle Type: |
DiamondBack |
