Sidewinder X3 Plus

Gold Finger Flat Cable This cable runs up the Z column to the X axis breakout board.  Adessive backed for easy installation. Includes: Cable (1 pc) Fits: Sidewinder X3 Plus Note: Does not come with the cloth tape the covers the...

Flexible Build Plate Surface is powder-coated, textured PEI on both sides. The textured surface gives the bottom of your prints a nice textured look and helps hide imperfections. Includes: Textured PEI build plate (1...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Titanium Heat Break Connects the the hotend heatsink to the heater block. Includes: Heat Break (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Heater Block Sometimes called a hot block or heating block.  Includes: Heater Block (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus Note: Does not include the retaining clip for holding the...

Retaining Clip for Heater Block This clip holds the heater and thermistor in place on the heater block. Includes: Clip (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery Hotend Assembly (Hotside)  This is a replacement stock hotend assembly for the Artillery Sidewinder X3 and X4 printers. It is sometimes called a nozzle assembly.  Includes: Heatbreak (1 pcs)Heater cartridge (1...

Hotend Heater Heats the heater block, Includes: Heater (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Hotend Mounting Screws These go through the heatsink and hold the hotend to the extruder. The heads of these screws are a little larger and will not strip as easily as the stock screws.  Includes: Screw (2 pcs) Size: M3Length:...

Hotend Thermistor Measures the temperature of the nozzle, Includes: Thermistor (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

X Axis Limit Switch Sometimes called an endstop sensor Includes: Limit switch (1 pcs) Location: X Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus

Y Axis Limit Switch Sometimes called an endstop sensor Includes: Limit switch (1 pcs) Location: Y Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery Mainboard Also called the control board or motherboard. Includes: Mainboard (1 pcs) Fits: Sidewinder X3 Plus Notes: Comes with X3 Plus firmware installed.

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

Artillery Print Head Assembly (Hotend/Extruder) Includes: Print Head (1 pc) Fits:Sidewinder X3 ProSidewinder X3 Plus

Artillery PTFE Tube This is the PTFE tube that installed between the extruder and hotend.  Note: This is a general length tube and will need to be cut to size for your specific printer. We recommend this cutter for a straight clean cut...

PTFE Tube Goes in the extruder/hotend. Includes: PTFE tube (1 pcs) Length: 45mm  Fits:Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Silicone Sock Sometimes called a silicone boot.  Includes: Silicone sock (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Spool Holder & Bracket  Includes: Spool holder (1 pcs)Bracket (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus Note: Does not include mounting hardware.