Tools & Supplies

M3x2 Set Screw for Bondtech Extruder M3x2 set screw for primary gear with inner diameter of 5mm. Hard 12.9 Grade for durability. Sold in pack of 5    

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK4Prusa XL Note: These are hex head set screws, not torx head (torx head is what comes standard on the MK4 and...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK4Prusa XL

M4X3 Set Screw 12.9 Grade Sold in a 4 pack    

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

M4X5 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Sold in units of one.    

Small Spool Roller for Artillery Sidewinder X2 This file was designed by James I. Click here to read more about the spool holder and to download the STL file.   Licensed under a Creative Commons Attribution-ShareAlike 4.0 International...

Socket Adapter for Slice Engineering Torque Wrench This adapter allows for the use of 1/4 inch sockets with the Slice Engineering Nozzle Torque Wrench. With this adapter you can use the torque wrench with different size nozzles by using...

L Shaped Socket Wrench Size: 10 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 7 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 8 mm Includes: Wrench (1 pcs)

L Shaped Socket Wrench Size: 9 mm Includes: Wrench (1 pcs)

Stress Relief Fitting Please Note: This is the STL file only. HDMI cable not included. On some R2s the sharp angle of the HDMI cable can cause the cable to crease and then fail. Print and install this stress relief fitting according to the...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Synthetic Oil with SYNCOLON™ (PTFE) This is a great oil to use on your linear rails or anywhere else you need good lubrication 4 oz bottle SAE Grade 85W Temperature range of -45°F to 450°F (-43°C to 232°C) Waterproof Food...

7ml of Synthetic Oil with SYNCOLON™ (PTFE) in a Handy Precision Oiler This is an industrial quality PTFE oil. Great for keeping the linear rails of your 3D printer sliding smooth and quiet. Rated to withstand temperatures of up to 450f, this oil...

4 Position, 90 Degree Right Angle, Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm  

Molex Terminal Block Plug 5.08mm 2 position 15 ampWire Entry: Right Angle Includes: Plug (1 pcs)

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:2 position20 ampSafety approval:  Shade of green may be different than photo

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:4 position15 amp

4 Position Vertical Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

PB Select™ Expandable Braided Cable Sleeve This PET self closing wire wrap has a cloth-like feel and is great for controlling the wires that run to the extruder or use it anywhere you need wire control.  Includes: Cable sleeve (1...

GD900 Thermal Grease Size: 1 gram Max working temp: 200c This thermal grease can be used on the cold-end side of the heat break to help dissipate heat to the heatsink. Do not use on the hotend side. For the hotend side, including the heater and...

Vibra-Tite Blue Threadlocker  This is a good medium strength thread locker for securing 6mm (or larger) fasteners. For smaller fasteners use purple threadlocker. Includes: 1.8ml Threadlocker (1 pcs) Note: Not intended for use in the hotend...

Vibra-Tite Purple Threadlocker This is a good low strength thread locker for securing small screws on your 3D printer. Includes: 1.8ml threadlocker (1 pcs) Note: Not intended for use in the hotend  Strength: LowColor: PurpleSize: 1.8...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

PB Select™ Wi-Fi Adapter ESP-01S for MINI+ (ESP8266 1MB) Tested to be fully compatible with the Prusa MINI+. Use this wireless adapter to add Wi-Fi to your MINI+. Once installed, you can send G-codes from your PC directly to the printer,...

  Flashforge Wrench  For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here.