Tools & Supplies

CD-20 Ceramic Screwdriver Used for adjusting stepper drivers and other electronics Tip Size: 1.8x0.4mm

Cover for Tool Battery Adapter  Fits: Makita compatible battery adapter        

Cover for Tool Battery Adapter  Fits: MilWalt battery adapter.

DC Power Cable with 5.5mm x 2.1mm Male Barrel Plug Specs Max current: 3A Red Connector: Center Pole Black Connector: Outer Pole Material: PVC Barrel Plug Size: 5.5 x 2.1mm Wire Length:100cm/39''(approx)    

Panasonic Automotive Relay 20A 24VDC 1 FORM A BRACKET Manufacturer: Panasonic Coil Voltage: 24 VDC Relay Contact Form: 1 Form A (SPST-NO) Contact Current Rating: 20 A Coil Resistance: 320 Ohms Coil...

DC Barrel Plug with Cord Plug: 5.5x2.1mm - Right Angle  Wire: 22AWG Wire Length: 1.5 Meter    

Adjustable DC-DC  Boost Converter XL6009 Module These boost converters are great to use in conjunction with our power tool battery adapters. Includes: XL6009 Converter (1 pcs) Specifications:Input Range: 3V - 32VOutput Range: 5V -...

DimaFix Pen  The DimaFix Pen provides an easy way to obtain the print bed adhesion you need. When heated above 60ºC, DimaFix provides a strong bond between your first layer and the build plate. DimaFix becomes inactive when cooled...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

HARDMAN DOUBLE/BUBBLE 2 Part Epoxy - Very High Peel Strength - Orange This is the epoxy we use for attaching the magnets to the R1/+ glass print bed. Full curing time is stated to be 7 days. However, when applying magnets to the R1 glass bed, we...

  E3D Dual Ball Bearing Fan - 40mm 12v These fans have the E3D seal of approval. Use on the E3D Titan Aero or anywhere else you need a good quality ball bearing fan. Includes: Fan (1 pcs)Extension cable (1...

Standard FEP Tube - Clear Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside Diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 200°c This is nice quality...

Ferrite Core Anti-Interference Ring Includes: Ferrite ring (1 pcs) Fits wire up to 4mm

Ferrite Core Anti-Interference Ring  Sold in set of 5 Size: 9x5x5mm

Torx Wrench Size: T6 Includes: Torx wrench (1 pcs) Fits: Set screws in Nextruder heater block

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

*Clearance item - No returns Note: The handles of these trimmers got a little scuffed up during shipping, other than this cosmetic defect, they are good little trimmers. M170 Flush Cut Wire Trimmers - 5in We find flush cutters like these are great for...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Fuse Pack Replacement fuses for Einsy and RAMBo boards Includes:15 amp blade fuse (1 pcs)5 amp blade fuse (2 pcs) Fits:Prusa Einsy for MK3/S/+Prusa RAMBo Mini for MK2/S & MK2.5/SUltiMachine EinsyUltiMachine RAMBo Mini

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)