Description
No returns on this item
As you install a new nozzle onto a MakerGear hotend, a small amount of material is removed from the nozzle to create a custom fit. This makes the nozzle incompatible with any other barrel due to the slight variations in tolerances among different barrels. Unfortunately, for this reason, we do not allow returns on any MakerGear nozzles, regardless of whether they have been installed.
Brass Nozzle for MakerGear V4 Hotend
Includes: Nozzle (1 pcs)
Nozzle size: 0.75mm
Nozzle Material: Brass
Filament size: 1.75mm
Fits:
M2 (with V4 hotend)
M3-SE
M3-ID
WARNING To swap a nozzle, it is very important to remove the hot end from the mount first or the barrel will likely be damaged. Please watch the below videos.
Removing your V4 hot end from the mounting plate.
Removing the nozzle from your V4 hot end.
Additional Information
Nozzles: |
0.75mm |
Nozzle Material: |
Brass |
Brand Name: |
MakerGear |
Nozzles: |
All Sizes |