AMS

  Bambu Lab AMS lite Feeder Unit - LEFT - Slot 1 & 2  The AMS lite Feeder Unit is specially designed to support the AMS lite for printing multiple colors and materials. This is the LEFT feeder unit. It fits slot 1 and...

  Bambu Lab AMS lite Feeder Unit - RIGHT - Slot 3 & 4 The AMS lite Feeder Unit is specially designed to support the AMS lite for printing multiple colors and materials. This is the RIGHT feeder unit. It fits slot 3 and slot 4...

  Bambu Lab AMS lite Filament Funnel Unit - LEFT - Slot 1 & 2 The AMS lite Filament Funnel Unit is the inner component of the AMS lite feeder unit. This is the left funnel unit.  Important  The left and...

  Bambu Lab AMS lite Filament Funnel Unit - RIGHT - Slot 3 & 4  The AMS lite Filament Funnel Unit is the inner component of the AMS lite Feeder Unit. This is the right funnel unit.  Important  The...

  Filament Hub for Bambu Lab AMS LiteThe AMS lite filament hub is a key part of reliable filament switching during multi-color or multi-filament printing. One end of the hub connects to 4 different PTFE tubes (up to 4 filaments),...

  Bambu Lab AMS lite Spool Claw (3 pack) The AMS lite Spool Claw is assembled on the Rotary Spool Holder and is used to secure the spool in place. The 3 rubber pads on the claws are used to increase the friction...

Bambu Lab AMS Mainboard (V2) The AMS mainboard is the center circuit board of the AMS. It includes a series of connectors through which various functional components are connected by cables. Includes: Mainboard (1 pcs) Fits: Bambu...

Bambu Lab AMS Power Board The AMS power board is a circuit board that receives power from the printer and supplies it to the AMS. Includes: Power board (1 pcs) Fits: Bambu Lab AMS Learn more about the replacement of the AMS Power Board...

Bambu Lab AMS RFID Board The RFID System can automatically identify the RFID tag on the Bambulab filament spools, which can then sync the filament information to the Bambulab slicer (Bambu Studio). Includes: RFID Board (1...

  Bambu Lab AMS Top Handle Replacement handle used to open and close the AMS top lid Includes:AMS top lid handle (1 pcs)Sealed o-ring (1 pcs)Screws (2 pcs) Fits: Bambu Lab AMS  

  Bambu Lab Bus Cable (4 Pin) Bus Cable used to connect the printer to Hub or Buffer Includes: 4 pin Cable - 260mm (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 SeriesBambu Lab AMS  

  Bambu Lab 6 pin Cable for the AMS 2 Pro and AMS HT The H2D printer can be directly connected to the AMS 2 Pro or AMS HT using Bambu Bus Cable - 6pin. Includes: 6 pin Bus Cable - 1100mm (1 pcs) Fits: Bambu Lab AMS 2 Pro,...

  Bambu Lab Bus Cable (6 Pin) Bus cable used to connect AMS to another AMS or for connecting AMS to Hub or Buffer Includes: 6 pin cable (1 pcs) Fits: Bambu Lab P1 SeriesBambu Lab X1 SeriesBambu Lab AMS  

  Bambu Lab Driven Support Shaft Assembly for the AMS 2 Pro  The AMS 2 Pro Driven Support Shaft Assembly is a roller for supporting the filament spool. Includes: Driven Support Shaft Assembly (1 pcs)693ZZ Bearing (2...

  Bambu Lab Filament Buffer for X1 and P1 Series Printers The Filament buffer is an accessory that is required in conjunction with a single AMS unit. Its function is to provide a buffering effect for the filament. The interface is 4-Pin cable with...

Bambu Lab Filament Buffer Connection Board The filament buffer connection board is located inside the AMS filament buffer and is equipped with a Hall sensor. It monitors the filament loading status by detecting the position changes of the buffer...

Filament Cutter - 3 Pack Replacement filament cutter. The filament can be cut to prevent the system from clogging. When used with AMS, it assists with multi-material switching. Includes: Filament Cutter (3 pcs) Fits: Bambu...

Bambu Lab AMS 2 Pro Power Board The AMS 2 Pro power board is a circuit board installed at the rear of the AMS 2 Pro. It is responsible for receiving DC power from the printer and transmitting it to the AMS 2 Pro mainboard. Additionally, it...

Bambu Lab PTFE Tube (Translucent Gray) Includes: 4 meter PTFE tube (1 pcs) We recommend this cutter to cut the PTFE tube. The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its...

  Bambu Lab Screw Kit for the AMS Lite and A1 Series Printers  The screw kit for the A1 series and AMS lite offers the screws most commonly used based on user feedback. Includes: M2x2.5 FHCS Machine Screw (10 pcs) M2.5x5 FHCS...