Creator Pro

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...

MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...

  Flashforge Motor Mount Includes: Motor mount (1 pcs) Location: Y Axis Motor Fits:FinderFinder 2Inventor 2Creator ProCreator Pro 2Creator MaxCreator Max 2

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

  Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Guider 2SRobo E3 Pro

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Power Inlet & On/Off Switch Includes:Power inlet with switch (1 pcs)Fuse (1 pcs) Fits:Creator ProCreator...

  Flashforge Replacement Power Supply Includes: Power supply unit (1 pcs)  Fits:Creator ProCreator Pro 2Creator Max Creator Max 2DreamerDreamer NXInventor

  Flashforge Print Surface Bed Tape Adhesive backed for easy application Includes: Print surface (1 pcs) Size: 153x232mm (can be cut to fit other printers) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Inventor (for Inventor 2 bed tape...

  Flashforge Extruder/Nozzle PTFE Tube This is the PTFE tube that fits inside the nozzle/heat break. Includes: PTFE tube (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Pulley Bracket Front Kit Holds Y axis rod in place Includes:Bracket (2 pcs)Idler Pulley Assembly (2 pcs) Location:Left...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. X Axis Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Fits:...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2...

  Flashforge Idler (Driven) Pulley Assembly Center shaft is about 37mm long Includes: Pulley assembly (1 pcs) Location: Y-Axis Fits:Creator ProCreator Pro 2Creator Max 2

 Used Item  Removed from low hour 3D printer, May have minor scratches and/or cosmetic imperfections. Creator Pro/Pro 2 Rubber Feet  Includes: Rubber foot (2 pcs)Installation Screws (2 pcs) Fits: Creator ProCreator Pro 2

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

Flashforge Extruder Fan Spacers These are the spacers that reside between the extruder fan and heatsink on some Flashforge 3D Printers. Includes: Spacer (4 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor

  Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with rectangular opening for spool holder)

   Used Item  Cables are removed from low hour 3D printers. Flashforge Spool Holder Includes: Spool holder (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2Guider 2Robo E3 Pro   Guider 2S HT (with...

  Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2

  Flashforge E Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Extruder Fits:Creator ProCreator Max

  Flashforge Stepper Motor - X/Y Axis Includes: Stepper Motor (1 pcs) Location: X or Y axis Fits:Creator ProCreator Pro 2 Creator MaxCreator Max 2 DreamerDreamer NXInventor

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Z Motor with Leadscrew (No Nut) Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead...

  Flashforge Z Motor with Leadscrew & Nut Fitment Note: Some older Creator Pro printers use the Dreamer Z motor/lead screw, which is a little bit shorter. Please check that your current leadscrew matches the picture...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits: Creator Pro

Gates GT2 6MM Belt Sold in lengths of 1 meter Belt width: 6mm The length of the belt you receive will be the quantity you order x1 meter. So, if you order a quantity of 4 you will receive one 4 meter belt.

  Top Cover This is the large clear acrylic cover that goes on the top of the printer. Includes: Top cover (1 pcs) Fits:Creator Pro (2016 or later version)Creator Pro 2Creator MaxCreator Max 2

   *Used Item  Removed from used Creator Pro printers, top covers may be scuffed and show signs of wear, but have no cracks and are in good working condition. Top Cover This is the large clear acrylic cover that goes on the top of...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)

  Flashforge Extruder V Bearing Includes: V bearing (1 pcs) Specifications:ID: 3mmOD: 12mmW: 4mmG: 9.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProCreator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2Guider 2Guider...

  Flashforge Wrench  For the heat break on some Flashforge 3D printers Includes: Wrench (1 pcs) Size: 6mm Fits:InventorDreamerDreamer NXCreator ProCreator Max Note This is not a nozzle wrench. Nozzle wrench available here. 

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

  Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...

Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings. The motor, limit switch and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings...

 Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Y Axis Carriage Bracket - RIGHT SIDE (Motor Side) This is the bracket that snaps onto the Y axis linear bearings...

  Linear Rod and Pulley Bracket Holds Y axis rod and pulley in place. Includes: Bracket (1 pcs) Location: Right rear corner only Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit left front/rear or right...

  Linear Rod and Pulley Bracket Holds Y axis rod in place Includes: Bracket (1 pcs) Location:Left RearLeft FrontRight Front Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Does not fit right rear corner. If you need...

   Like New  - Removed from new or lightly used printers.  Z Bracket Set These brackets are located at the top and bottom of the z axis and hold the linear rods and leadscrew in place.  Includes: Top bracket (1...

   Used Item  Removed from low hour 3D printer.  Flashforge Z Limit Switch (Endstop) Cable Includes: Cable (1 pcs) Fits:Creator ProCreator MaxDreamerDreamer NXInventor