Finder & Finder 2

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

Air Duct Screw (M3x8) Guider 2/2S, Inventor 2, Finder Holds the plastic air duct in place. Includes: M3x8 screw (2 pcs) Fits:Guider 2Guider 2S HTInventor 2FinderRobo E3 Pro

Microswiss All Metal Hotend Kit - 0.40mm Includes:0.40mm plated brass wear-resistant nozzle (1 pcs)Heat break (1 pcs)Jam nuts - to aid in removing old hotend (1 pcs) Description:The Microswiss all metal hotend allows you to print at much higher...

  Flashforge Bed Leveling Bolt - 3 Pack Includes: Bolts (3 pcs) Size: M3X45mm Fits: Inventor 2Inventor 2SFinderFinder 2 Note: Does not include Bed Leveling Thumb Nuts or Bed Leveling Springs.

  Flashforge Bed Leveling Card Includes: Leveling card (1 pcs)

  Flashforge Bed Leveling Sensor Switch Includes: Bed leveling sensor (1 pcs) Fits:Guider 2Guider 2S HTFinderFinder 2Inventor 2Inventor 2SRobo E3 Pro Note: This is the sensor only and does not include the arm or servo. 

  Flashforge Servo Assembly Includes: Servo assembly (1 pcs)Limit switch (1 pcs)Bracket (1 pcs) Fits: FinderFinder 2Inventor 2Inventor 2S

  Flashforge Bed Leveling Thumb Nut - 3 Pack Includes: Thumb nut (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NX  

  Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft  Includes: Belt (1 pcs) Size: 250mm Fits: Creator ProCreator Pro2 Creator MaxCreator Max 2DreamerDreamer...

  Flashforge X Axis Drive Belt Includes: Belt (1 pcs) Length: 650mm Location: X Axis Fits: Inventor 2FinderFinder 2

  Flashforge Y Axis Drive Belt Includes: Belt (1 pcs) Length: 634mm Location: Y Axis Fits: Inventor 2Inventor 2SFinderFinder 2

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Flashforge Build plate Tray This is the tray that the build plate slides into.  Includes: Tray (1 pcs) Fits: FinderFinder 2

  Button for Touch Screen Includes: Plastic button (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro

  Flashforge X Limit Switch (Endstop) Cable Runs from X axis limit switch to mainboard Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Flat Cable for TFT Touch Screen  Connects touch screen to mainboard Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2Inventor 2S  WARNING  Pay close attention to the orientation of your current cable. Plugging this...

  Flashforge X Axis Motor Cable Includes: Cable (1 pcs) Location: X axis motor Fits:Finder 2Inventor 2

  Flashforge Y Axis Endstop (Limit Switch) Cable Runs from mainboard to Y limit switch Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Flashforge Y Stepper Motor Cable Runs from mainboard to Y stepper motor Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Flashforge Y Axis Pulley Assembly (Drive Shaft) Includes:Y axis drive shaft (1 pcs)Pulley (3 pcs)Flange bearing (4 pcs)Spacer (1 pcs)E-Clips (2 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2

  Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Finder 2 (24v) Extruder Assembly Complete assembly including hotend. Includes: Extruder/hotend assembly...

  Extruder Cover Includes: Cover (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro Note: Mounting hardware not included.

  Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2

   Used Item  Cables are removed from low hour 3D printers. Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2

  Flashforge Extruder Lever Assembly - Left Side  Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt  (1 pcs)Spring  (1...

   Used Item  Removed from low hour 3D printers Flashforge Extruder Lever Assembly - Left Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1...

  Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max...

Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...

 Used Item  Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers.  Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...

  Flashforge Blower (Turbo) Fan This is the fan that cools the part being printed.  Includes: Fan (1 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2

  Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steel filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...

  Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator...

  Flashforge Filament Guide Tube Includes: Guide tube (1 pcs) Fits:FinderFinder 2Inventor 2

   Used Item  removed from low hour 3D printers. Flashforge Bed Leveling Thumb Nut and Spring - 3 Pack Includes: Thumb Nut (3 pcs)Spring (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator...

   Used Item  Removed from low hour 3D printers. Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft  Includes: Belt (1 pcs) Size: 250mm Fits: Creator...

Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

  Flashforge Heat Break (Threaded Pipe)  Includes: Heat break (1 pcs) Fits:FinderFinder 2.0Inventor 2Inventor 2SGuider 2

Heat Break (Thermal Tube) for Microswiss All Metal Hotend Kit This is a replacement heat break for this Microswiss all metal hotend upgrade. Includes: Heat break (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2

  Flashforge Heater Block  This heater block is for the latest version thermistor from Flashforge.  Includes:Heater block (1 pcs)Screw for holding thermistor (1pcs)Set screw for holding heater (1 pcs) Fits: Finder 2 (with bead...

  Flashforge Heater Block  Includes: Heater block (1 pcs) Fits:Guider 2Finder 2Inventor 2 NOTE: Does not include set screw for holding heater cartridge. If needed, purchase set screw here.

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Volts: 24Watts: 40 Fits:Finder (24 volt)Finder 2Guider 2Guider 2S HTInventor 2Inventor 2SRobo E3 Pro

  Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Specs:12 volt58 watt Fits: Original Finder 12 volt

Flashforge Heatsink Includes: Heatsink (1 pcs) Fits:FinderFinder 2Inventor 2Inventor 2S

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

  Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor 2Inventor 2SFinder Finder 2

   Used Item  Removed from low hour 3D printer        Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor...

  Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 4

   Used Item  This item is fully functional, but may show signs of use, such as scuffs and scratches. Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Creator ProDreamerInventorFinder

  Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versionsFinder 2Monoprice VoxelRobo E3

  Flashforge Z Axis Endstop (Limit Switch) Fits:FinderFinder 2

  Flashforge X Axis Limit Switch (Endstop) Includes: Limit switch (1 pcs) Fits:FinderFinder 2

  Flashforge Y Axis Limit Switch (Endstop) Fits:FinderFinder 2

  MYT LM8SUU Linear Bearings for Flashforge and other 3D Printers Includes: Bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 17mm Fits:Creator ProCreator pro 2Creator MaxCreator Max 2DreamerDreamer NXInventorInventor 2FinderFinder...

  Flashforge Linear Rod Includes: Linear rod (2 pcs) Size: 8x320mm Location: X axis Fits:FinderFinder 2Inventor 2Inventor 2S

  Flashforge Linear Rod Includes: Linear rod (2 pcs) Size: 8x340mm Location: Y axis Fits:FinderFinder 2Inventor 2Inventor 2S

   Like New  Removed from new or low hour 3D printer. Flashforge Linear Rod Includes: Linear rod (2 pcs)Brackets (2 pcs)Screws (4 pcs) Size: 10x290mm Location: Z axis Fits:FinderFinder 2Inventor 2Inventor 2S

Please read our returns policy regarding electronic items Flashforge Finder 2 Mainboard Printed on board: FINDER PLUS V2.0.2 DATE:2018-03-24 Includes: Mainboard (1 pcs) Fits: Finder 2 The new boards may default to Chinese...

  Please read our returns policy regarding electronic items Flashforge Finder Lite Mainboard Includes: Mainboard (1 pcs) Fits: Finder Lite The new boards may default to Chinese. Below is a video by PicoKit on how...

Flashforge Metal Hotend Cover Metal shroud fits inside the hotend air duct and protects the heater block. Includes: Hotend shroud (1 pcs) Fits:Guider 2Guider 2S (HT)Inventor 2/SFinder/2Robo E3 Pro

MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...

MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...

MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

  Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3 (all versions)Adventurer 4 (all versions)Creator ProCreator Pro...

  Flashforge Motor Mount Includes: Motor mount (1 pcs) Location: Y Axis Motor Fits:FinderFinder 2Inventor 2Creator ProCreator Pro 2Creator MaxCreator Max 2

  Flashforge Brass Nozzle Includes: Brass nozzle (1 pcs) Orifice Size: 0.40mm Note: PTFE tube not included - use the links below to buy the proper PTFE tube for your printer Fits:Guider 2 (not for HT version) - PTFE tubeInventor...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

  Flashforge Power Switch/Inlet PCB Board Includes: Power inlet switch board (1 pcs) Fits: Finder 2 (24 volt)

  Flashforge PTFE Tube for Hotend/Nozzle This is the PTFE tube that fits inside the nozzle & heat break Includes: PTFE tube (1 pcs) Fits:FinderFinder 2Inventor 2

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. X Axis Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Fits:...

   Used Item  Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2...

M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...

M4X4 Set Screw  12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)

  Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

  Flashforge Spool Holder *This is a used product and may show signs of light use. Includes: Spool holder (1 pcs) Color: Red Fits: Finder Finder 2

  Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printer

  Flashforge Replacement Bed leveling Spring Includes: Spring (1 pcs) Fits:FinderFinder 2 Inventor 2Inventor 2S Note: Sold in units of one - 3 are required per printer

  Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2

  Flashforge Z Motor Includes: Motor (1 pcs) Fits: Finder 2

  Flashforge Stepper Motor (X/Y/Z) Includes: Stepper motor (1 pcs) Location: X/Y/Z Axis* Fits: Finder *(X/Y Axis Only)Finder 2 *(X/Y Axis Only)Adventurer 3 (X/Y/Z)Adventurer 3 Pro (X/Y/Z)Adventurer 3 Pro 2 (X/Y/Z)Adventurer...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  Flashforge Finder 2 Bead Thermistor This is the latest (and only) version available from Flashforge. Includes: Thermistor (1 pcs) Fits: Finder 2 (with new heater block)  IMPORTANT  Please read...

  Flashforge Finder 2 Thermistor Includes: Thermistor (1 pcs) Fits: Finder 2 (with threaded heater block)  IMPORTANT  Please read everything below before ordering. This thermistor does not fit the Finder, it...

  Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:Inventor 2Guider 2Guider 2S HTRobo E3 ProFinder*  *IMPORTANT  If ordering for the Finder, please read everything below before ordering.Make sure the picture above...

   Please read our returns policy regarding electronic items Flashforge Touch Screen Includes: Touch screen (1 pcs) Fits: Finder 2Inventor 2Inventor 2S  

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

  Hotend Unclog Pin Helps clear blockages from the hotend Diameter: 1.5mmLength: 133mm Includes: Unclog pin (1 pcs)