MK4/S

Nextruder Hotend Assembly with 0.40mm Brass Nozzle Fully assembled hotend for the Nextruder   Nozzle Size: 0.40mm  Includes:0.40mm Prusa Brass Nozzle* (1pcs)Heaterblock (1pcs)Heater 40 W - 120 mm (1pcs)Thermistor NTC 100k - 115 mm...

Prusa Nextruder Main Cable Replacement main cable connecting the Loveboard and xBuddy board. Includes: Nextruder Main Cable (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S

E3D Prusa Nextruder Nozzle Orifice Size:  Choose size above Type: BrassFilament Size: 1.75mm Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are not the CHT nozzles that come stock on the...

E3D Obxidian Nozzle for Prusa Nextruder (choose size above) Made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing...

Prusa Nextruder Silicone Sock (3 Pack) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...

E3D Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL and MK4 Includes: Adapter (1 pcs) Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa...

Nextruder V6 Nozzle Adapter This adapter makes your Nextruder compatible with any V6 nozzle. You can use it with the Original Prusa XL, MK3.9, MK4 and CORE One Includes: Adapter (1 pcs) Fits:CORE OneMK3.9MK3.9SMK4MK4SXL Note: Nozzle not...

Prusa NFC Set This is the replacement of the NFC parts on your printer. Includes:NFC coil (1 pc)NFC coil cable (1 pc)Double-sided tape (1 pc) Fits: Prusa MK4S To replace this part, please consult the Prusa Assembly Manuals...

Nozzle Cleaning Needle 0.3mm Diameter Includes: needle (5 pcs)  

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

PB Select™ Nylon Spacer for Prusa Nextruder This is the spacer the seats into the Nextruder PG cover on the below listed printers.  Includes: Spacer (1 pcs) Size: 13x24x2,5mmFits: Prusa MK3.9Prusa MK4Prusa XL

NYLON 3x555 mm Includes: NYLON 3x555 mm (1 pc) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

PE Cable for LCD, xBuddy and PSU Includes: PE cable 460/420 mm (1 pc) Fits:MK3.5MK3.9MK3.9SMK4MK4S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

PE Faston 6.3x0.8 Includes: PE Faston Connector (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa Mk4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...

PEI Print Surface - 260x242mm Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI surface. These can slightly...

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

Prusa MK4 Power Panic Cable (with 2 wires)  IMPORTANT  Before you buy this replacement cable, make sure your printer already has a power panic cable with two wires. Includes: Power panic cable (1 pcs) Fits: Prusa MK3...