MakerGear

  8x10 Build Surface for MakerGear Printers Made from borosilicate glass, this 8"x10"x0.13" (20cm x 25 cm x 3.3 mm) comes standard with a sheet of polyimide tape already applied. Includes: Glass print surface (1 pcs)Polyimide tape (1...

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

Slice Engineering Copperhead™ Heat Break for MK10 Bimetallic Heat Break™ - Stainless steel and Copper AlloyRated to 450 °C For more documentation on the Copperhead™ Heat Break, please see the Technical Specifications...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

  Idler Pulley Set for MakerGear 3D Printers Includes:Bolt (1 pcs)Toothed Pulley (1 pcs)Nylon Bushing (1 pcs)  Note: You need one pulley for each belt. Order 2 sets if you need a pulley for each belt. Fits:M3-SEM3-IDM2 Rev G-H 

  Idler Set for MakerGear M2 3D Printers Includes:Bolt (1 pcs)Bearings (3 pcs)E-clip (1 pcs) Fits: M2 Rev A through F Note: for the MakerGear M2 Rev G through H, use the M3 idler set available here

  MakerGear X Axis Limit Switch Includes: Limit switch (1 pcs) Fits: M3

MakerGear X Axis Limit Switch Includes: Limit switch (1 pcs) Fits: M2

  MakerGear Y Axis Limit Switch Includes: Limit switch (1 pcs) Fits: M3

MakerGear Z Axis Limit Switch Includes: Limit switch (1 pcs) Fits:M2M3

Henkel 60905 LOCTITE® 609™ Press Fit Retaining Compound - .5 mL (.02 oz) Capsule This is what MakerGear recommends for installing the pinion gear onto the extruder motor shaft of the M2/M3 3D Printers MSDS

Replacement Magnet sheet for 203*254mm FlexSys™ Build Plate Includes: Sheet magnet with adhesive backing (1 pcs) Size: 203x254mmMax temperature: 90c Fits:MakerGear M2MakerGear M3  

  Please read our returns policy regarding electronic items RAMBo Mainboard for MakerGear OEM replacement mainboard made in the USA by UltiMachine Includes: Mainboard (1 pcs) Fits:M2 M3SEM3ID Notes: This board ships with...

Molex™ Connector Set for MakerGear 3D Printers Each set includes:1x Molex connector receptacle, 2 position, 3mm, vertical1x Molex connector plug, 2 position, 3mm, vertical2x Molex connector pins, 26-30awg2x Molex connector...

Molex Connector Set for MakerGear 3D Printers This connector is used for the MakerGear thermistor and heater cartridge. Each set includes:1x Molex connector receptacle, 2 position, 3mm1x Molex connector plug, 2 position, 3mm2x...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

OEM Replacement Probe (Pin) for the BLTouch Smart  Genuine ANTCLABS replacement pin for the BLTouch. This is the latest version which is salmon color and has ANTCLABS stamped on the pin.  Includes: Pin (1 pcs) Fits: BLTouch...

Original BuildTak Sheet Size: 203x254mm (8x10in) Includes: Original BuildTak Sheet (1 pcs) Features:Creates an optimal bond between the 3D printed object and build surfaceAllows for clean and easy removal of the object from the build...

PB Select™ Parakeet Bed Clips for MakerGear 3D Printers We designed these low profile bed clips for use with our MakerGear printers The clips have a small beak that just reaches the glass bed to hold it in place. The "beak" that holds the...

PEI Print Surface Adhesive backed for easy application. Includes: PEI Sheet (1 pcs) Specifications:Material: ULTEM 1000Dimensions: 203*254 mm (8x10")Thickness: 175um Fits:MakerGear M2MakerGear M3 Notes:This is NOT a spring steel sheet.Tiny dots...