Prusa

Heatbed Wiring (Red Wire) Runs from heatbed to xBuddy board Includes: Red wire (1 pc) Note: Both red and black wires are needed for the heatbed assembly. Fits: Prusa MK3.5Prusa MK3.9Prusa MK3.9S Prusa MK4Prusa MK4S To replace this part,...

Prusa MK4 Heater Cartridge (Hotend Heater) Includes: Heater (1 pcs)M3x4 grub screw (2 pcs)  Specifications:Voltage: 24VWattage: 40WLead Length: 120 mm Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this...

PB Select™ Heater Cartridge (Hotend Heater) for Prusa XL, MK3.9 and MK4 Includes:Heater (1 pcs)Set screw with T6 Torx Head (2 pcs) Specifications:Voltage: 24VWattage: 40WLength: 120mm Fits: Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa...

PB Select™ Heater Block (Hot Block) for MK4/XL Includes:Heater block (1 pcs)M3x4 grub screw with T6 torx head (3 pcs)  Fits:Prusa CORE OnePrusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the...

PB Select™ Nextruder Heater Block - Plated Copper This Nextruder heater block is made of nickel-plated copper. It's fully compatible with the Original Prusa Nextruder hotend. Includes: Copper heater block (1 pc)M3x4 grub screw with...

PB Select™ Heater Block Includes:Machined aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MK2Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa Mk3SPrusa MK3S+E3D V6RepRap

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The thermal paste should not be applied to the hot side of...

PB Select™ Heater Block for Prusa MINI Includes:Aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+  Note: After changing hotend parts, a PID tune is recommended. 

PB Select™ 24 Volt Heater Cartridge for Prusa i3 MK3 Series Even heating throughout the cartridge for better heat distribution to the heater blockSilicone leads terminated with ferrules Includes: Heater cartridge (1 pcs) Voltage: 24...

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage: 40WLength: 820 mm Fits:MINIMINI+ Note: The Molex...

E3D Prusa Specific Heater Cartridge This is a replacement hotend heater cartridge - E3D 12V 40W. Includes: Hotend heater cartridge (1 pcs) Specifications:Voltage: 12VWattage: 40W Fits: MK2MK2SMK2.5MK2.5S Note:This is ONLY compatible with...

 or  Prusa Specific Hotend Heater Cartridge (24 volt) Replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge (1 pcs) Specifications:Voltage: 24VWattage: 40W Fits:MK3MK3SMK3S+ Notes:1. This heater cartridge...

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...

PB Select™ Heater Cartridge for Prusa i3 MK2/2.5 Series Even heating throughout the cartridge for better heat distribution to the heater blockSilicone leads terminated with ferrules Includes: Heater cartridge (1 pcs) Specifications:Volts:...

  E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Note  Disassembled from new Prusa Hotend Assemblies and may contain residual traces of thermal...

Prusa MINI Heatsink This is a replacement heatsink for the MINI and MINI+. It is ONLY compatible with the Original Prusa MINI and MINI+. Includes:Hotend heatsink MINI (1 pcs)Threaded PTFE connection (1 pcs)Screws: M3x4 (3 pcs)Thermal paste (0...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Prusa Nextruder Hotend Heatsink and Load Cell Includes: Hotend Heatsink (1 pcs)Load cell - pre installed (1 pcs) Fits: Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals...

HEPA Filter for Prusa Enclosures Includes: HEPA filter (pcs) Fits:Prusa MINI EnclosurePrusa i3 MK Series Enclosure Prusa XL EnclosurePrusa HT90 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...