Prusa

PB Select™ Prusa Compatible V2 P.I.N.D.A Probe Includes: V2 PINDA (1 pcs) Fits:MK2.5MK2.5SMK3MK3S To test your current PINDA probe, follow this guide from the Prusa Knowledge Base.

Planetary Gear Assembly & Planetary Gear Ring (PG Assembly + PG Ring) Includes:PG ring (1 pc)PG assembly (1 pc)  CAUTION:  Please replace both parts in your Nextruder, as it may not work properly if you replace one part...

Prusa MMU2S-Einsy power cable Replacement MMU2S to Einsy power cable.  Includes: Cable (1 pcs) Fits:MK3 with MMU2SMK3S with MMU2SMK3S+ with MMU2S Note: Only compatible with the MK3/S/+. NOT compatible with MK2.5/S printers. To...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Prusa MK4 Power Panic Cable (with 2 wires)  IMPORTANT  Before you buy this replacement cable, make sure your printer already has a power panic cable with two wires. Includes: Power panic cable (1 pcs) Fits: Prusa MK3...

Power Supply Unit (PSU) for Prusa MK2 Series -  12V 240W  This 12 volt power supply unit is the same brand/model as the original power supply that is on the Prusa MK2/2.5 series printers. Includes: Power supply unit (1 pcs)...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9Prusa MK4Prusa XL  To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...

Prusa Print Cooling Fan This is the blower fan that cools the part being printed. Includes: Fan (1 pcs) Fits: Prusa MK3.9SPrusa MK4S Note: Does not fit MK4 To replace this part, please consult the Prusa Assembly Manuals. Make sure to...

  Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.

Prusa Mini Copperhead Hotend Upgrade Kit from Slice Engineering This all-in-one, plug-and-play upgrade takes your 3D printing to the next level by eliminating heat creep, preventing clogs, and speeding up 3D print times. Featuring the revolutionary...

Prusa PSU - 24 Volts This is the replacement power supply unit ONLY. It does NOT come with any cables. Buy the MK3 PSU kit here.  Includes: Power supply unit (1 pcs) Specifications:Voltage: 24VDCWattage: 240WCurrent (MAX): 10AFuse:...

Power Supply Unit (PSU) Replacement power supply unit for the Original Prusa MINI/+, SL1S, and CW1/S. Includes: Power supply unit (1 pcs)  Specifications:24 Volts150 Watts Note: this is the PSU only and does not...

Prusa MK3 Power Supply Assembly Replacement Power supply unit 24V 240W (assembly). It is ONLY compatible with MK3/S/+. The PSU itself is also available separately, without any cables or fasteners. Includes:Power supply unit 24V...

PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MINIPrusa MINI+ To replace this part, please...

PB Select™ PSU-xBuddy Power Cable Includes: xBuddy PSU power cable (1 pcs)  Important:  To connect xBuddy board and the black PSU two cables are required. Each cable comprises two wires. Overall Length: 455mm (including...

Prusa Buffer Tube - PTFE This is a replacement PTFE tube for the MMU2S unit to the Filament Buffer. Includes: PTFE tube (1 pcs) Specifications:Length: 650 (tolerance +/- 1.0 mm)Inner diameter: 2 mmOuter diameter: 4 mm Fits: MMU2S To...

Prusa MINI PTFE Fitting PTFE Fitting for PTFE tube extruder and heatsink connections Includes: PTFE Fitting (1 pcs) Fits:MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for...

PTFE Fittings Set for Prusa Mini Use this set to simplify the install, use and maintenance of Prusa Mini’s bowden tube.Instead of using 3 PTFE tube sections, use one only.Includes push-fit collets for ease of use and effective hold of the...

PB Select™ PTFE Tube for Prusa MMU2S  This is the replacement PTFE tube for the MMU2S Front-PTFE-holder. Includes: PTFE tube (1 pcs) Note: This is the 19mm PTFE tube only, it does not include the PTFE holder (pictured)...

PTFE Tube 2.5MM ID Sold by the meter: For example, if you order a qty of 4 you will get one 4 meter piece. Inside diameter: 2.5mm (±0.25mm) Outside Diameter: 4mm (±0.25mm) Color: White Max Working Temp:...